5sfte parts list ?

[CamZilla]

Hi guys I want to know what parts would be best for my turbo setup pushing 300whp ..I have some parts now but I am holding off before I get any other since I am new to all this and before I just did honda mods.I am looking for a good setup that will last so any comments or tips from 5sfte owners would be realy nice..thx


Parts I have

-Eagle 5sfe forget rods
-stock crank shaft shot peened knife edged nitrated
-.040 oversized block painted with 4 cherry red coats lol
-Gt35R turbo used (7000km on it aprox looks new)
-3sgte oil pan
-3sgte stage 3 clutch 4 puck custom from a shop in town(st165)
-650cc Rc injectors
-walbro 255lph pump
-Zex 75 wet shot

parts I am looking for
-e153 trans (LSD would be nice)
-axels for e153 ( should i go custom? )

-3 gauge pod
-st165 flywheel
-turbo manifold
-bearings/gaskets/seals
-ARP bolts (head and mains)
-oil feed and drain lines
-aftermarket radiator
-intercooler
-standalone


(money is no problem time is I had put away money for a GTR skyline but importer sold before I could pay)

[Hamsterman]

what kinda car is it going into?

I made this thread in the camry forum - with a bunch of help from people on mr2oc.com

http://www.toyotanation.com/forum/t105924.html

I am pretty sure of the following
-3sgte oil pan does not work - just tap your existing 5s for oil return
- where are you going to get a manifold for that gt35R? If you need a custom one made -check out the site for the shop i work at and shoot us an e-mail... www.speed-source.net
- e153 axels will be really fine with 300whp - i believe the mr2 guys run them up to around 500hp
- what are your plans on the standalone? were you thinking of an EMS? because that woudl be a pretty tall order on a 5s...

It would really help to know the car for this project - but if you are going into a celica/mr2/camry the 3sgte might be a better route - in terms of finding EMS solutions - internals for the motor - and potential down the road... I mean a built 5s is going to be very much on par with a good 3sgte setup, but if you want those kind of number right away - and want to go more in the future and have some extra cash, 3s is really a great motor

At speed source - we have lots of expirence in these kind of swaps and forced induction setups, so don't be afraid to call!

[CamZilla]

Its a Gen3 camry 5spd 1992
If there are mounts I can buy for a 3sgte direct swap I will do it but I dont see any around .As for a EMS I have like 3(AEM,autronic,megasquirt) lined up that I have used on Hondas in the past .

I will check out for a cheap 3sgte but I want to install myself.

[CamZilla]

Let me know whats needed for a 3sgte swap and I will think about selling my stuff ..

Gen3 5spd camry exactly needed lol

[Hamsterman]

Originally Posted by CamZilla

Let me know whats needed for a 3sgte swap and I will think about selling my stuff ..

Gen3 5spd camry exactly needed lol

if you are really serious about a 3sgte swap - give me an e-mail @ theamazingnate@speed-source.net