|
HID Questions.
OK, i have two HID Kit's at home.
one is a D2S hella which i want to sell(check want/sell section). and the other is a Hanabi h4 kit.
the both are diff, but the same in ways.
my Hanabi has 1 messed up ballast, and i want to connect it to the hella one so i can use the bulbs.
hte problem i run into is the Hanabi kit has a + and - wire. simple..
but the hella 4th gen kit has 1thick dark green wire and 2 smaller and similar light green wires goin into the ignitor.
now i dont know which one is power and ground. the harness that goes inot the ballat has the 3 wires from above and a yellow power and 2 grounds that go in the current car harness for power and ground. and the other brown goes into the chassis for grounding..
now i want my hanabi bulb to work with hella ballast. can anyone give me a diagram to do it.
thanks
Bigshoguns
|
Linear Mode
