SR5 vs. GTS for AE86

[eggman]

Problem Problem Problem!!!

I am doing a GTS conversion or an Automatic SR5. I have put the engine in place but the transmission mount doesn' line up. I am wondering if anyone have encounter this problem before?

I think the chassis code is different. Does that have anything to do with it? I can see that the hole for the shifter are different. Does that have to do with automatic and manual? Or is it the SR5 and GTS? Please help out.

Peter

[Voodoo.Priest]

The SR5 should have the same chassis code as the GT-S. They had to be made from the same chassis to meet safty standards here in North America.

The holes cut out for the GT-S and an Automatic SR5 for the shifters because they have to be because they have different transmissions.

But as far as weather or not they shoul line up I don't know. Try asking at Club 4AG.
club4ag.com

[Stan]

Your problem is with the engine mounts and the transmission mounts.

You need the following:

• Left and right GTS engine mounts 2 x part # 12361-16010
• Left and right GTS mount stabilizers 2 x part # 12381-16010
• AE86 manual transmission mount (produced after 2/84) part # 12371-16030

These parts will line everything up properly for you.