supra or mr2 CT26

[wontonjohnny]

any pros and cons you guys know of???

the application is for a 3.0 3vzfe

should i go with the supras ct26 cause of equal displacment or mr2 casue of revised design?

are they the same or do they have different ratios?

which can give more boost??

i know the supra ct26 is single enrty and mr2s are dual enrty but would that matter in my application with a single collector pipe?

thanks.

[zoni]

you should not use a ct26 on a 3.0... its too small. it wasnt even that good for the 2.0 3sgte. the supra uses 2 turbos, and those arent good enough... look into some different turbos, t3/t4 hybrids are good, or an upgraded ct26 with a 57 trim wheel is good. something with a/r's in the 50s-60s is good... just read up on turbos. look at what some of the supra guys upgrade to... remember they have a 3.0 too.

[wontonjohnny]

im not looking to have the world fastest camry, i think tonys got that title wrapped up..haha

just something to make my daily driver as fast or faster than high end sedans

looking to boost about 10 psi and put out around 250 whp with the manaul tranny it should be doable

[zoni]

ok well in that case, i'd say use the mr2's/alltrac's since it is already configured for single turbo...

[Wraith]

The MR2 CT26 is good for 240WHP while the MKIII Supra CT26 should be able to push alittle over 300WHP

[wontonjohnny]

ok thanks ... ill go with the 165

[arcasmachineracing]

CT20b!