4AGE vs 4AGZE SWAP - Toyota Nation Forum : Toyota Car and Truck Forums

Iceman · 06-13-2002, 04:44 AM

I have taken the engine from an '88 MR2 SC and installed it into a '85 MR2 non-SC that I am building to go ice-racing. I was wondering if any of you might be able to direct me to someone in the Central Ontario Region that may be familiar with the wiring of these cars so that I can complete my project. As an aside, I will have a nice '88 MR2 with TRD lowering kit and a 4AGE engine for sale soon.

GoodSteer · 06-14-2002, 01:16 PM

you should just do sds and call it a day...my ae86 will soon run gze with sds...its the easiest way, its not like 3k, and you can do it yourself

Iceman · 06-15-2002, 08:03 AM

SDS?

ericlee303 · 06-15-2002, 10:55 AM

Simple Digital Systems. http://www.sdsefi.com

I did the Jap GZE swap into my 94 Corolla with this standalone computer and it works great. A little harder to program, but extremely reliable a hella lot cheaper than anything else.

Don't waste your life looking for ECUs and harnesses and sensors.....

Xenon · 06-16-2002, 03:50 AM

Why would you do all the work and then sell you car?

Iceman · 06-17-2002, 04:52 AM

The car I will sell is the '88 car that donated the AGZE engine. I am planning to install the AGE into it.

bondobondo · 06-17-2002, 09:28 PM

are you doign all of that just cuz the 85 chassis is lighter?

Iceman · 06-18-2002, 06:19 AM

Actually I started with the '85 car and did the chassis prep work, roll cage, etc then decided that I did not have enough hp. I then came across the supercharged car and figured that it's motor would be more suited to my purposes, more bottom end power.