HELP! 3SGE BEAMS wiring help needed

[SoulSearcher]

Howdy!

I wondered if anyone knew anything about the MR2 Red Top Beams Motor (3SGE) wiring?

We have purchased a half cut, dropped in the Beams Red Top into our 1991 SW20 but are having a problem with the wiring. Specifically the ECU PIN out. We have a copy of the LANDER RACING ECU pinout, but we're still having problems. Specifically, we're after a schematic wiring diagram for a 97-99 3SGE with a three row ECU PIN OUT.

Can anyone help?

Thanks


Lesley
Australia
hlab@tpg.com.au
www.mr2sa.com.au

[lcarocha]

Red Top BEAMS... DROOOL. Grat pick but unfortunatly those engines are rare enough to find any info on, specially the ECU pin out, if I stumble onto anything I'll let you know.

BTW, I found this doing a search in google, it took me 25 seconds to find it on this page: http://toyotaownersclub.com/forums/i...showtopic=3066

[SoulSearcher]

Hi,

Yeah, that's the lander one that we already have. What we need is a schematic wiring diagram, for example: wire x is green with white stripe, goes from D10 via y to z and is for the air conditioning.

does that make sense?


Lesley

[FrancisS]

Hi

Pls let me know if you have the wiring diagram and ECU pinouts for a second gen 3SGE

Any help would be much appreciated