1997 2c deisel air con vacuum servo
Theirs a vucuum controlled servo on the fuel pump. When I turn on a/c, it pulls in and lifts idle. So far so good, however, when I turn of a/c, no drop of idle occurs. If I pull hose off, servo releases and idle drops correctly. Hose I traced to thingy at top of power steering rack? Two other hoses goes to this thingy. Car hoses may be mixed up? Or a/c relay dropping out is not switching a solenoid to drop vacuum to this idle up servo? OR what? Opening bonnet to pull off hose is a drag, so I disconnected the sucker. HELP Me
|
Linear Mode
