Adam's Pads & Adapter - Toyota Nation Forum : Toyota Car and Truck Forums

Mike5150 · 05-02-2008, 10:35 AM

I have a question about the quick release adapter and pad. With this adapter what prevents the metal from coming through the pad and touching the painted surfaces?

***Dana_15*** · 05-02-2008, 01:53 PM

Mike,

I have three of his pads, an all black one, a black/white one and an orange pad. They all are really thick and have seem to be of a two piece construction (actually two pads) with a plastic disk in the middle. The quick release adapter does not even make it to the middle of the pad. Litterally I can take the all black pad (the softest one) and push all the way down on it and the adapter would not hit my paint.

It is a really good system, much better than velcro. The black/white pad is a must have.

Pb · 05-02-2008, 05:47 PM

The pads have a plastic core that keep the adapter from going through all the way. I don't see how you could damage your paint with these pads & adapter.

Mike5150 · 05-03-2008, 02:06 AM

Thanks guys for helping to clear that up!

Justin@Adams · 05-09-2008, 10:14 AM

Dana and PB thanks for the quick replys you two are on it