Gen2 Reverse Glow Guages Installation - Toyota Nation Forum : Toyota Car and Truck Forums

Gen2Roller · 07-10-2003, 05:58 PM

Hey guys i need some help with my gen2. I bought a pair of Reverse Glow Guages for my Gen2 form ProCarParts and i have no clue how to install them! Any 1 with a gen2 could help me out with installing these Guages?? Please Help me out!

91 Camry V6 All-Trac Project...
Soon to Drop a 3SGTE with all the racing parts....

shuluke · 07-10-2003, 06:25 PM

ooohhh nice, where did you get it from?

Shuluke

high c · 07-10-2003, 06:53 PM

4 scrows holding outer plastic peace in and for scrows holding gages in

Gen2Roller · 07-11-2003, 06:38 AM

I got them form www.ProCarParts.com

I knoe how toremove the cluster, but i dunt knoe how to remove the old guages and run the wires..

91 V6 Camry All-Trac Project
Soon to swap engine for 3SGTE with all the racing parts...

88 LE · 07-11-2003, 10:42 AM

Quote:

Originally posted by Gen2Roller
I got them form www.ProCarParts.com

I knoe how toremove the cluster, but i dunt knoe how to remove the old guages and run the wires..

91 V6 Camry All-Trac Project
Soon to swap engine for 3SGTE with all the racing parts...

You don't need to remove the guages from the cluster. You just need to take off the clear plastic cover (theres a few screws). Then you need to take off the black plastic trim piece that sits on top of the guages.

The indiglo guages just simply slip over the needles. Get some 3M double sided scotch tape and put a bunch of little pieces on the backside of the glow guages, especially around the area where it goes over the needle. The tape will hold down the glow guages and prevent them from bubbling up and rubbing on the needles.

Theres just 2 wires for the guages. +12V and ground. Hookup the +12V to the parking light wire. You need to use a DMM and probe the wiring that plugs into the back of the guage cluster to find it.

menaboy64 · 07-11-2003, 12:26 PM

how gay, they dont have them for 87s

88 LE · 07-11-2003, 12:43 PM

Quote:

Originally posted by menaboy64
how gay, they dont have them for 87s

Yeah.

Another thing is that they don't have reverse indiglos for the 4cyl. with a tach.

You have to buy the 4cyl. and V6 reverse indiglos cos their guages for the V6 has a tach. F**king ghey.

menaboy64 · 07-11-2003, 12:45 PM

yeah I got the 4cyl with the tach, oh well

toyrolla · 07-11-2003, 03:33 PM

Shuluke, I know someone who's selling a V6 set, but it depends if you have a tach or not. They are selling the V6 with tach, originally purchansed from ProCarParts.

Menaboy64, an 87 Camry is a Gen2. To do the 4cyl 5speed version, you would need to get both the 4cyl version and the V6 version (for the tach). If you have a 4cyl automatic, then you would just need the 4cyl version by itself. The same contact that has the V6 version for sale also has the 4cyl for sale.

Drop me a email off list. I believe the guy is a regular on Toyotoanation. I speak to him often on the Camryman.org site.

-Toy

shuluke · 07-11-2003, 04:00 PM

Im intrested. My email is Shuluke@hotmail.com

Shuluke