Calling all RedSIBarons

[Carlman(90 CS)]

hi RedSIBaron,

re-reading thru your thread on ur mates car i noticed that you said yo had a RHD shifter on a LHD car. Do you plan on changing it to a LHD one, if so ccould i purchase that one off you??

i say this cauz NO1 around here has one junkys, paper nd so on.

thnx.

[RedSIBaron]

hey man...yah its not off a RHD car, that was white90dx i believe, cuz he has the shifter out of a gt-four when he did his 3sgte swap...

I am using a 7th gen celica shifter from stateside...so its shorter... but works fine...

what exactly are you trying to do, i might be able to help...

[Carlman(90 CS)]

oh sorry memory bit stressed lol

i am having alot of trouble trying to find a 7th gen shifter arm in oz. the only place ive found isthe dealer lol, they want 500$ for whole assembly.

now just to make sure b4 i go and internet buy, it work without any trouble and its just the arm i need?

[RedSIBaron]

i'll tell you what...heres what i will do...ill goto the junkyard tomorrow after work (i cant today cuz i have my suit on and tomorrow is casual)...more than likely they will have a 7thgen celica...ill pull the shifter for you and we'll figure out how to get it shipped, i wont charge you more than what i paid for it +shipping...if i can toolbox special it, then ill just charge you shipping forit

i should add that the shifter actually has a slight mounting lean towards the right side...SO it will actually be good on a RHD car...it will be pushed far forward, but IMO its better cuz its so short so learn to live with it, OR you can make an adapter plate to just move the shift knob towards you a bit, it will look ghetto as hell, but its a trick ive seen on racecars to get he shifter closer to where the driver wants it...ill post a pic of that when i make one for my 02si and kuler2.0's car...

[atobe]

i think i replied to your other thread telling u where to get one but i guess you never checked...
but i also did this... here's a pic comparing the 2 shifters

celica left camry right. it's a lil bit tad longer.

[RedSIBaron]

they might not look that different but there is a HUGE difference between shifter throws...the celica one is so short i couldnt believe it...

[Carlman(90 CS)]

ATOBE: i did look where u sed and the guy sold it to another buyer, thnx 4 the pic

RedSIBaron: THANKYOU SO MUCH DUDE u dnt know how hard it is 2 get 1 around here.

our junkys are shithouse!

dyu know how much shippin wud be?

[RedSIBaron]

no clue on shipping man, ill check it after i get the shifter, but if you want to check it, goto UPS's site and do a shipping quote on international shipping from US area code 45219 to your address and put the box dimensions at 1ft by .5ft by .5ft (thats just rough sizing, box wont need to be that big i dont think) and make the shipping wt 3lbs...we'll exagerate, and let me know what they tell you on shipping...

[Carlman(90 CS)]

hey RedSIBaron,

only grab it if you can do the old toolbox job, or if it isnt too much, only because the shipping (if i did it right) wat lyk around 100$

but ull hav 2 chek cauz yea im ozzie nd dnt use imperial measurements

thnx again.

[atobe]

http://www.baxworld.com/ use this .. i use this at work to ship stuff international. check with them first.. shouldn't be more than 50$ for that size box

[RedSIBaron]

hey man, heres an update...i went to the yard and didnt find a 7th gen celica...but then after we've left kuler2.0 and my friend says "oh yah there is one out by the fence, you didnt see it?" so ill go back sometime this week and see if i can get it...gotta love it huh...ah well...ill let you know when i have it