91 Camry stereo info

[GregElliott]

I recently put a Pioneer head unit in-dash and there is an open gap underneath the stereo between it and the ash tray.
I've noticed some people have placed a plastic "sunglasses" type of tray in that slot... any info on where I can get one similar to this?

[PaulyJay]

some models came out standard with this tray. so check the wreckers. you can also order a generic one from a local parts supplier. i'm assuming you had the "base/treble" leveling system with your stock unit? you got all the other nice stuff so it must be the equivelent of out "ultima" here in aus.

[GregElliott]

it came with the cassette deck.
high-tech back in 91. =)

[GregElliott]

The junkyards around here don't have any Gen2 Camrys anymore... they've sent 'em off to be crushed.
Is that anybody out there who could help me find one with the tray in the dash?

[1883atlantics]

you need the tray or the entire bezel thingy? I have one that is black, out of my 90 Le Sedan. The online toyota dealers all have them but of course they charge a bit.

EDIT: I dont think I am talking about the same thing you are. I have the stock piece, which is what you appear to already have. Sorry for the confusion.


Jeff

90 Camry Le Sedan 2WD AT, Silver

[GregElliott]

Originally Posted by 1883atlantics

you need the tray or the entire bezel thingy? I have one that is black, out of my 90 Le Sedan. The online toyota dealers all have them but of course they charge a bit.

EDIT: I dont think I am talking about the same thing you are. I have the stock piece, which is what you appear to already have. Sorry for the confusion.


Jeff

90 Camry Le Sedan 2WD AT, Silver

I just need the little tray that goes under the radio. btw that picture was just an example of what I needed--I copied it from the picture thread.
I have the bezel that goes around the radio, air controls, and it holds the ashtray.
I'm just looking to get ahold of the tray that would fill the open gap between the new headunit and the ashtray.
Right now I have an open slot that looks awful.

I highlighted the tray (or dish or whatever ya wanna call it) that I need. I outlined it in orange.

[atobe]

get one of these http://cgi.ebay.com/Scosche-1255-1-2...3286.m20.l1116 or install an EQ which will make it look way cooler... do you have the same HU as me ?? the 4600MP ?? looks like it

[GregElliott]

Originally Posted by atobe

get one of these http://cgi.ebay.com/Scosche-1255-1-2-Din-Snap-in-EQ-Pocket_W0QQitemZ330272396720QQcmdZViewItem?_trksid =p3286.m20.l1116 or install an EQ which will make it look way cooler... do you have the same HU as me ?? the 4600MP ?? looks like it

I actually have the DEH-16 HU
this is somebody else's car, I'm just using the pic as an example of what I need.

I've done some research and I guess it's called a DIN pocket.

[PaulyJay]

i understand now! lol! i thought it was your pic! cos it had a pioneer! lol! just grab the one off ebay atobe posted the link for. it's pretty much what you want. you can look into your local parts dealer too. they sometimes stock them.

[GregElliott]

that schosche one that atobe posted says that its a 1/2 din.
I dunno if that's the same as a single din.. do I bought a metra kit for toyotas that said it had a din pocket... I figure that might be alright

[PaulyJay]

i'm kinda lucky cos i don't have to look for one. i already have one. lol! but i know what it's like trying to find a part noone seems to have, but you know is available.

[atobe]

oh sorry i just did a quick search on ebay for 'din pocket' and that was the first one i saw by itself and i just posted it.. didn't bother reading the desc

[white90dx]

Ha! I have a few of those lying around in various states of modification (for gauges, switches, etc)... any stereo shop will have them. If you ordered from Crutchfield, they sometimes send it for free even (depends on what your stock system was, etc).

-Charlie