Nice rack she said.

[schaff70]

Finally got 2 pairs of 205/50/16s for the Chrysler Sebring wheels I've had for about 2 months now. The fender gap is a bit much, but some Intrax springs will be ordered this summer. The Yakima clips for my rack showed up last Saturday & it took me a while to figure out how to get the rack on. I was used to the old style Q-towers which were much easier to install. This will allow me to get back to the beach & do some surfing again.







I also tinted the front corners, turn signals, rear side markers & tails with some VHT Nite Shades. 5 light coats for each lens. It's tough to see in the bright light, but it made a noticeable difference in how the car looks.

On the down side, it also looks like I'm going to be installing a pass side control arm & bushing and maybe both front wheel bearings in the next month or so.

I have a new 5th gen (not the current style) Camry rear emblem in the mail, so I'll be removing all the rear emblems & installing just CAMRY on the right rear of the trunk lid.

[blu_91_cam]

Looks really nice man I always wondered what those sebring rims would look like on a Gen2. A drop would definitely pull the look together. How about a couple more pictures when you get the chance so that we can see how well the fender gap is.

[91_ToYoTa_CaMrY]

that is sweet i really want to tint the front corners of my camry now, it looks really good.

[bkbajan]

wht year sebring did u get those from again?

[t3chnique]

Hey how much you get your Yakima racks for?

[schaff70]

Originally Posted by bkbajan

wht year sebring did u get those from again?

They are standard on most of the newer Sebring convertibles as well as the sedans. If you look at about 20% of the Chryslers, you'll see these rims.
I picked the set up lightly used off craigslist for $125.

For my rack, I had the old style Yakima Q-towers from a long time back. After finding out the hard way that they no longer support clips for the old towers, I waited patiently until a set of used towers with locks showed up on Ebay. He had them listed buy it now for $99 + shipping. You can find new towers on Ebay for around $150 for all 4.
I also got the clips on Ebay for $35 shipped (2 pairs). I had the fairing & 2 different bike holders as well as a surfboard strap for a while now, I jus tdidn't have the towers.

You can find used racks on Craigslist now & then.

I still need to take a better picture so you can see the tinted lenses.

[bkbajan]

Originally Posted by schaff70

They are standard on most of the newer Sebring convertibles as well as the sedans. If you look at about 20% of the Chryslers, you'll see these rims.
I picked the set up lightly used off craigslist for $125.

For my rack, I had the old style Yakima Q-towers from a long time back. After finding out the hard way that they no longer support clips for the old towers, I waited patiently until a set of used towers with locks showed up on Ebay. He had them listed buy it now for $99 + shipping. You can find new towers on Ebay for around $150 for all 4.
I also got the clips on Ebay for $35 shipped (2 pairs). I had the fairing & 2 different bike holders as well as a surfboard strap for a while now, I jus tdidn't have the towers.

You can find used racks on Craigslist now & then.

I still need to take a better picture so you can see the tinted lenses.

Cool..i know,i always see them...on cars
i can never find any at the junk yard tho..guess i gotta keep lookin
i wonder how they would look on my car..its white

[Wangan]

Looks Great!!!

[DC 2vzfe dx]

yeah V6 baby!! im not the only one who put some Sebring rims on my camry!! lolz have to say they look great on them both types =] good taste man.. o got all four rims with almost brand new tires for dirt cheap $200 flat =]






need spacers for the rear stil but i dont know how to take my rim keys off since they stole my key!!! FUCKIN BITCHES WHO STEAL CAMRYs

[DC 2vzfe dx]

hey what brand is ur rack?? did you buy the yakama q clips??? need one for this winter season tired of folding my seats and taking my system out to fit them snowboards

[schaff70]

Originally Posted by DC 2vzfe dx

hey what brand is ur rack?? did you buy the yakama q clips??? need one for this winter season tired of folding my seats and taking my system out to fit them snowboards

It's a Yakima rack - 48" crossbars, Q-towers with Q-30 clips (4).

I'll have to take a pic of it loaded up with my surfboards one of these days. I'm hoping to make it down to the Outer banks this summer for some bigger surf, but I'll have to take the Land Cruiser so I can drive on the beach.

[white90dx]

Originally Posted by DC 2vzfe dx

need spacers for the rear stil but i dont know how to take my rim keys off since they stole my key!!! FUCKIN BITCHES WHO STEAL CAMRYs

Any wheel/tire shop will be able to get them off in about 2 minutes... Yes, even with the keys on there.

-Charlie

[viktord1]

dang those sebring wheels do look good. I've been looking into VW bbs wheels. they are pretty good looking and cost about $400 used with tires.

[JMSports]

Originally Posted by white90dx

Any wheel/tire shop will be able to get them off in about 2 minutes... Yes, even with the keys on there.

-Charlie

Wheel Shops Sell Keys. Just go and pick one up..

[TBayToyotaBoy]

Those Sebring rims (both sets) look good. Got me thinking, with spacers they'd look good on my Celica, too...