3sge

[fredk]

Finally, I have started collecting parts to put my 3sge into my blue 89, over the years I have lost alot of small parts from the motor so I am going to a junk yard tomorrow and round up all the small stuff that has gotten lost and put the manifolds back onto the motor. I know the flywheel went somewhere and am wondering if the one on the 3sfe in the car now is an 8 bolt, if it is ill just use that one and the clutch, i am going to have a wiring harness made and found a 5 speed from a 96 camry for it today since the one in the car is the 1st design and is trashed anyways

[Jimnist]

BEAMS 3s-ge?

[fredk]

no beams, gen1 with a polished gen2 head, its all brand new, got a harness for it today and getting ready to start the project

[fredk]

I am putting a 3sge into my 89 Camry, went to the junkyard today to get a celica wiring harness and got one with a 4 wire o2 sensor, its from a 89 GTS and the sensor is by the rack and pinion, not on the ex manifold, and the ex manifold is made real high with the y pipe way up by the head area, much higher than my 87 manifold on my 3sge and with this different manifold the egr tube will have to come from somewhere else because on my 87 motor it comes from the drivers side of the ex manifold and this one the owner pinched off the tube because of no place for it to go?