A/c dead once more

[skateordie]

So I recently did my seals (oilpump) along with the timing belt. I had a friend give me a hand. after all the work was done and i drove home, and drove the next morning, my windows can't help but fog up inside coz of the climate. I turn on the a/c to get rid of the fog...BAM...it's dead the light turns on but i dont hear the compressor running...I recently replaced the condenser and did got it vaccumed and charged..i dunno if it's just a coincidence that it just stopped working after doing some engine work,but who knows...

im not sure if i missed reconnecting something while we were putting everything back together.. if anyone knows what I might've missed, I'd appreciate any suggestions/ comments...we're in the winter season so the A/c is not much of a problem right now..but it does help when i've got 4 other people fogging up the windows inside

[Doctor J]

Check wire connection to magnet clutch and compressor rotating sensor (these are pulled while unplugging the alternator).
also jacking under the compressor may severe wires to the rotation sensor. Other then that there should be no connections between the T-belt change and A/c work