Grill Idea for 92-96

[JMSinMD]

A while back I was thinking about doing a custom grill for my 99 Camry which involved cutting out the T center emblem in the front grill and replacing it with a horizontal section from a second 97-99 Camry front grill, but the problem is in my year it is attached and I would have to remove the whole front bumper, etc, etc. In the 92-96 Camry with removable grill this might be a good idea as well. Once you have the center emblem removed and replaced with the horizontal section from a second grill, paint the whole grill to match your cars body color. Who'll be the first? Jon.

[92_Gen3_5SFE_LE]

already been done, many different variations.

[RedPhoenix]

I personally like mine

[WestCoastff]

my boy at gateway autobody here in az is in the process of making one for me. Its the same as stock its just hes taking off the yota symbol in the middle and making the lines run straight across. Were gonna back it with double black mesh... should look tight. ill post some pictures when i get it back

[Mayne Event]

can someone post a picture of this maybe? I dont get it......

[WestCoastff]

yea for sure ill post a picture when its done

[JMSinMD]

--------------------------
----------{ }-------------
--------------------------

Imagine this as a stock grill above, then remove the emblem and have the middle line continue

-------------------------
-------------------------
-------------------------

then paint the entire grill the same color as the rest of the car.

[zoni]

Originally Posted by JMSinMD

--------------------------
----------{ }-------------
--------------------------

Imagine this as a stock grill above, then remove the emblem and have the middle line continue

-------------------------
-------------------------
-------------------------

then paint the entire grill the same color as the rest of the car.

NICE PIC!!!!! lol
kinda does explain the idea though...

[prnc_chrmng]

[JMSinMD]

That is exactly the idea I was thinking about. Jon.

[sk8chip98]

i made mine out of a sheet of black mesh grill insert of a civic body kit. just bent it up and cut it till it fit nice. ill post a pic of it if any one wants to see it.

[sk8chip98]

i also made a front bumper splitter (like the ones that go on the bottom of a kit) out of one of those rear lip wings from 3M. came out pretty sick nice and clean look to the car.

[DAMON]

mine is the same design as above only painted black, ratko's was like this on his coupe. its not all that difficult to do yourself, just time consuming

[RedPhoenix]

^^^ my brother.... ^^^

[midnightmach]

LMAOO you guys both have the 3 gen camrys thats crazy.