apex safc I help

[Stonegrave]

i got this afc from a guy i know but he lost the directions and doesnt remember which wires are to what. my friend from work told me that on some dsm website they had the which wire goes where layout. tried theirs, had like 5 wires left over, and my car wouldnt start(because you have to splice into the signal wire for the MAF, and since the afc didnt turn on it couldnt make a complete circuit). i only get to borrow it for this weekend, so does anyone have the directions for what color goes to what on a apex safc I? there is yellow, white, red, black, green, blue, brown,orange, pink and gray. thanks for any help in advance.

[Eye8Pussies]

go to the apexi site and download the manual- then compare the wires to hte factory wiring diagram

I have mine all mapped out to install (safcII), but I can't remember where I put it lol

[Stonegrave]

yeah, found the colors and where they need to go.(all numbers taken off a printout of the 1mz ecu from a dealership, got my buddy to print one out for me)

red: power = got that hooked straight to battery
green : rpm signal = black and orange wire coming from the 2nd wire bundle from top(e8 27)
black and brown : ground = brown has to be closer to ecu, black 1 cm away, havnt found which one is ground yet, i think it might be e10-17

purple : knock = havnt gone to find this one yet, ill probably just splice onto the actual knock sensor wire

white and yellow are for map systems, oj and pink are for maf
orange - maf to afc = i cut pink wire coming from the actual maf sensor
pink - afc to ecu = connected onto the other side of the cut pink wire

any help on finding which wire grounds the ecu, and which wire is the knock sensor will be really helpful. thanks in advance, hope this helps anyone else that might come across the same problem in the future.