Gen 4 INJEN SRI on Gen 3

[xxswat718xx]

Is it possible? Can it work? Thanks guys.


BTW- It's for the I4

[bigbird]

u might have to modify it slightly but it should work.

[MIC0417]

I have said this before. Two vacuum hose caps and thats all. One custom brace of course.

Injen-IS2020 (Summit #) it is made for the Gen 4, all you need is a custom mount and two vacuum hose caps.

Heres a pic.

This is where the caps go. The one in the back is on the bottom.



This is the brace I made in about ten mintues. It's one piece of Aluminum that I bent with a vise and drilled two holes in. Two red places are attatch points, the one near the strut area is a hole with no use. The Yellow is parts that were changed on the Gen 4, on the Gen 4 these parts are moved and that is what braces the intake, but with the Gen 3 you have to make a brace.


__________________

[Venom_5]

why not just get a Gen3 SRI? theyre not that expensive

[xxswat718xx]

I'm actually selling the intake but somebody with a Gen 3 inquired about it. Thanks guys.