Steering Wheel Question

[fusion1320]

Ok Im New Here My Question Is There A Company Where I Can Get An After Market Steering Wheel Hub Adapter For My 96 Toyota Camry Cause I Wanna Swap It Out For An After Market Wood Grain Trim One. And Another Question Is I Seen These One Piece Clear Camry Headlights And Now I Cant Find The Web Site Do Any Of U Guys Know Where I Can Get Some?

[Tom 2000]

On the steering wheel, why don't you just get one one of these from Grant?



It snaps on, you can keep the air bag.

Comes in either burlwood or rosewood.

http://www.grantproducts.com/default.html

On the headlights, are these what you're looking for? These are called DEPO Headlights. It's designed for the 92-94 models, but can be made to work on the 96.

I found it here

http://www.racerwheel.com/rt100760.html

You see these on eBay also
http://cgi.ebay.com/ebaymotors/DEPO-...QQcmdZViewItem

[360glitch]

Those Depo's are as good as it get's for the gen 3 Camry. If you want to put them on your 96 you're also going to have to replace your grill with one from a 92-94 Camry as well as do a little grinding on the top of your bumper cover to make it all fit.

[RodMillenFan]

Originally Posted by Tom 2000

On the steering wheel, why don't you just get one one of these from Grant?

It snaps on, you can keep the air bag.

Comes in either burlwood or rosewood.

IMO, those snap-on units look kinda weak. Do they look better in person?

Originally Posted by Tom 2000

On the headlights, are these what you're looking for? These are called DEPO Headlights. It's designed for the 92-94 models, but can be made to work on the 96.

Depo clears look sweet! Again, I've only seen in pictures, but I have Depo branded OEM light replacements, and they're high quality units.

[fusion1320]

i found the headlights late last night while i was searching through TN i foundem on nopi for bout a 170 and as for the grill what if i just swap the whole front like the bumper grill and fenders to a 92-94 cause i was gonna do it anyway cause my bumper and fenders are junk cause my sister cant drive would it all match up to a gen 3.5

[BlueFusion6851]

The gen 3 front end looks better than the gen 3.5 IMHO. And if it works in your budget, just get the clear one-piece headlights and clear turn signals. That will look amazing.

[fusion1320]

but where can i get the onepiece clear headlights?

[renmike]

I don't know about 'clear' one piece headlights, but I know the JDM headlights were one-piece, but I think they were the same clarity of the usdm ones.

On the other hand, the jdm headlights I have on my 95 do look *slightly* clearer than what my original ones did, and that was after I polished them pretty clear.