Anybody have pics of a projector retrofit?

[Sniperdude]

I searched and looked back at all the threads where people did retrofits but the pictures aren't there anymore, but I hope someone might have saved them???

[Creeps228]

CamryOwner98, bronzemaxell i have have some

heres bronzemaxells camry

camryonwer98

[darksparkz]

For what car?

[ToyCam187]

I think for a gen 3 if i'm correct. But any is fine.

[Creeps228]

well when he gets back there are two there for him to look at...

Also white3ch0c0late has done a retro

[Sniperdude]

Thanks for those Creeps, but I was thinking more along the lines of the gen3 cleared depos that have been retrofitted for projectors. I know tony did em, and so did SW.... their tutorials have dead pics...

[Creeps228]

pm them thats the most you could

[bigbird]

Gen 3 Headlight Thread - Ftw!

here ya go...theres an expanded discription with more pics on HIDplanet

[Sniperdude]

You're my hero.

[Sniperdude]

In the part of the housing that holds the projector, is it good to paint the reflectors black so that you don't get glare?

[CamNub]

^No. It doesn't really do anything. It's mostly a cosmetic thing.

[Sniperdude]

So wiring Bi-Xenons aren't as easy as cutting the end off the low beam connector and splicing the projector into it?

[CamNub]

Bixenons are a bulb type.

[white3ch0c0late]

Originally Posted by CamNub

Bixenons are a bulb type.

WRONG.

Bi-xenon projectors have a solenoid which control the shield of the projector and moves it to create a high beam, NOT the bulb. "Bi-xenon" is what "hid kit" manufacturers use to describe a bulb which is not a TRUE bi-xenon, but is merely given a boost in wattage to make it seem like a high beam.

[CamNub]

OPk, I apologize nasty Nancy.