Error Code: P0466 - Toyota Nation Forum : Toyota Car and Truck Forums

tsanghan · 09-05-2007, 10:13 PM

Hello everyone I just got 1998 Toyota Camry V6 LE my check engine light came on. I went to Autozone I got the error code P0466 from the reader. He then re

it said:

"The PCM has determined that the voltage signal from the evap purge flow sensor is out of range for the current engine operating conditions."

Someone please help me. I just moved from CA to NV. Maybe the weather has something to do with it.

wonger · 09-05-2007, 11:51 PM

do yo mean p0446

might be malfunction in either the VSV for EVAP, the VSV for vapor pressure sensor, or in the vapor pressure sensor itself.

and since you drove a long way.. check under the car on a life or jack it up and get under there to see if any hoses or your canister could be damage

tsanghan · 09-06-2007, 12:03 AM

P0466 Purge Flow Sensor Circuit Range/Performance

Thats the error code for it. Thats what I pulled from AutoZone the CEL is off right now. Should I go get it checked out anyways ?

wonger · 09-07-2007, 01:57 AM

evap codes.. not really something to worrie about.. just when you need to smog hehe

but if lights gone.. you should be fine.. but can get checked out if it comes back

***zoni*** · 09-07-2007, 10:03 AM

most likely a vac hose came off... click fig. 12 and look at the hoses between the TVV for EVAP and wherever they go...
http://www.autozone.com/az/cds/en_us...rInfoPages.htm