5sfte What Tranny?

[zach5187]

I am thinking about turboing my 5sfe in my 1999 camry. I know that the transmission in the vehicle can not handle the power when boosting to 15 psi so i was wondering is their an AUTOMATIC transmission that is a simple swap that i can use? Also who has done an obdII that is experinced in all the technical information with the turboing

[Venom_5]

you can build the automatic up, however i think 15 psi is a stupid goal .... i would aim for 6-8psi if you enjoy not blowing up your engine

[GrkBallaG]

An automatic wont even last at 5-6 psi, better off swapping a manual.

[zach5187]

I planned on doing forged pistons and connecting rods and also doing a 3 angle valve job

[Venom_5]

plan on doing this:

http://www.toyotanation.com/forum/sh...58#post1963858

plus a little extra

[GrkBallaG]

Originally Posted by zach5187

I planned on doing forged pistons and connecting rods and also doing a 3 angle valve job

Okay, even with that plan on forking out about a little over 1g for a built auto transmission, maybe even more

[vdop69]

as far as the obdII look up 97camryman's threads.

[BlueFusion6851]

Originally Posted by zach5187

I planned on doing forged pistons and connecting rods and also doing a 3 angle valve job

IMHO, I would do a 5 or 7 angle valve job, 3 is somewhat obsolete nowadays

[camry man68]

Originally Posted by BlueFusion6851

IMHO, I would do a 5 or 7 angle valve job, 3 is somewhat obsolete nowadays

7 Angle! I didnt know you could get 7 angles, wow.

[uibalnme]

If you want a built auto trans, check this site out.

http://www.importperformancetrans.com/toyotaauto.shtml

[Eye8Pussies]

yeahhh....1K for a built tranny isn't realistic either