need intake parts

[ChitownCamry01]

ok i failed emissions w/ an aftermarket eBay intake; i was goin to reinstall the original equipment, but after a few days of searching, all i found was the filter housing. i can find the intake tube on eBay, but where can i find the part that goes underneath it? i hope someone knows what i'm talking about.

[bigbird]

couldnt pass emissions with an intake? sure u got all ur hoses plumbed right? just its presence shouldnt cause u to fail emissions tests. in any case are u talking about teh bottom half of the airbox? there are really only 4 components, the 2 parts of the airbox, the MAF sensor and the intake tube that connects to the throttle body. what engine and year? in any case th best place to get that stuff is at a junk/salvage yard.

[BigLuigi11889]

what type of enigine u have v6 or inline 4? cause if u have a v6 u may have something cuase i got a v6 avalon with a injen short ram intake....

[Venom_5]

Originally Posted by bigbird

couldnt pass emissions with an intake? sure u got all ur hoses plumbed right? just its presence shouldnt cause u to fail emissions tests. in any case are u talking about teh bottom half of the airbox? there are really only 4 components, the 2 parts of the airbox, the MAF sensor and the intake tube that connects to the throttle body. what engine and year? in any case th best place to get that stuff is at a junk/salvage yard.

and the IAT sensor

[geoff5093]

When you installed your eBay intake, did you make sure you connected all your sensors back up?

[Kep]

On an I-4 the part underneath the intake hose is called a "resonator". I am uncertain just what it does. If someone does know, I'd like to know.

Kep

[Sniperdude]

And you're not the only tuned Camry in Chicago. That's a blasphemous statement.

[ChitownCamry01]

alright i have a 2.2L i have pictures of the part i need so if you need to seem them let me know; my email is craigcamry01@gmail.com thanks everyone

[xet]

Originally Posted by Kep

On an I-4 the part underneath the intake hose is called a "resonator". I am uncertain just what it does. If someone does know, I'd like to know.

Kep

resonator changes the tone of the intake. I believe it is supposed to make it "quieter"

[BigLuigi11889]

Originally Posted by ChitownCamry01

alright i have a 2.2L i have pictures of the part i need so if you need to seem them let me know; my email is craigcamry01@gmail.com thanks everyone

jus post the pics.... use photobucket if u need to...

[amerikim]

I read resonator was about intake noise and controlling 'pulsing'.
I returned to stock because I didn't get any bonus from all the intake mods.
The noise irritated me after a year.
May have thought different if I had a manual instead of this slow shifting automatic.

[ChitownCamry01]

this is the part i need. any clues where i can get it? the junkyard by me dont got it :-(

[Venom_5]

you dont need that resonator/water collector ... i drove all summer without one before i installed my aftermarket intake ... i covered the hole with duct tape, and a few other members have done the same thing

[camry man68]

Originally Posted by Venom_5

you dont need that resonator/water collector ... i drove all summer without one before i installed my aftermarket intake ... i covered the hole with duct tape, and a few other members have done the same thing

I covered it with duct tape then a bought a plug from home depot, i forgot the size, i think its 1 3/4.

[ChitownCamry01]

ok might have a new problem; i was going to get an Injen intake for the car and was reading the instructions, and i cant find my vacuum switching valve. i might have accidentally took it off somehow; anyone know where i can find one?
http://www.injen.com/galleries/produ...directions.pdf take a look on page 2 and look at figure 6; i cant find that part under the hoood