Swaping I4 for V6 - Toyota Nation Forum : Toyota Car and Truck Forums

FlyingO · 01-09-2008, 11:40 AM

Hello All,

I am looking for some advice. I have a 95 Gen 3.5 Camry. It has the straight 4 engine. I am not sure how, but we got a hole in the engine and it needs to be replaced. I was looking at a V6 from a 95. It is coming out of a wrecked Camry and has pretty low miles.

My question is would this fit with out having to mod anything else. I have a AT tranny and am pretty positive I would have to get new engine mounts.

If any one knows where I can get another 4CYL around Salt Lake City Utah for pretty cheap that would be a great help as well.

Thanks

Venom_5 · 01-09-2008, 11:43 AM

it would fit just fine ... PM member "ASG14" as he knows how to do it, and knows people who can get you some good info

bigbird · 01-09-2008, 11:58 AM

i may be wrong but im almost sure ull need the tranny as well. the I4 auto cant handle the extra tq as well i believe.

search around here too, theres lots of useful info to be had. my advice...if ur gonna do the work to swap in a V6, ud be shooting yourself in the foot if u didnt swap in the e153 manual tranny as well.

***Knailgun*** · 01-09-2008, 11:59 AM

search icon...it works......some members have done it and I want to say that there is a complete write up somewhere on here.....you'll need more than just an engine btw

ECale3 · 01-09-2008, 01:27 PM

you'll want the V6 wiring harness, ECU, Tranny, Tranny Mounts, and Motor mounts for sure.

FlyingO · 02-01-2008, 10:23 AM

Thanks for the help everyone. I was able to get an 4 Cyl engine from a 95 camry that was wrecked in the back. Thanks for all the input!