Any instructions for installing Air Intake on a 92 Camry LE?

[phat555]

Is there any detailed instructions for installing Intake on a 92 Camry LE? I just purchased this air intake http://cgi.ebay.com/ebaymotors/aw-cgi/ebayISAPI.dll?ViewItem&item=601967534&r=0& amp;t=0 and I was wondering if anyone can show me a webpage that shows how to install intakes for a 92 camry thanks any help will be appreciated.

[Phi]

not "exactly" what you're looking for, but may still help;
http://www.camryman.org/intake1.htm

[SpectraBlueCam]

Just need to be advanturous. You can't fuk up your car too badly, unless something falls into the throttle body (which is impossible unless you start your car without any air intake).

Good luck.

[92CAMRYGTS]

i can tell you how to make a cold air intake out of that thing but your gonna have to get youe hands dirty and remove some things. i did it and i like it a lot better then the short one. let me know.

[X cam-tech X]

Hey wassup CamryGTS I have something similar to that but its just a L shaped pipe and then a clamp then a smaller pipe but I only Have the big L pipe on and the filter but If I was to add the other piping to make it a cold air cause my boy with his V6 camry gave me this piping becasue he had it on his car but he never showed me how to route it so where would I route it?

[88 LE]

On 2002-02-18 07:30, X cam-tech X wrote:
If I was to add the other piping to make it a cold air cause my boy with his V6 camry gave me this piping becasue he had it on his car but he never showed me how to route it so where would I route it?

You route the piping through the hole underneath the fuse box and into the fender with the filter on the end. You want the filter to sit close to the bottom so that it can suck in cold air.

You need to remove all the stock intake piping + the resonator to route the new piping though. Stock stuff sucks anyways.

Take alook at the link below.

http://www.teamdelsol.com/howto/coldair/diycoldair.htm

Heres a pic of the CAI (cold air intake) that I made for my car. :grin:

[92CAMRYGTS]

yea i ran mine into my front bumper but i took a different route from yours. i have the 5sfe so i really never looked at how to do it on the 6 cyl. i try to take a pic of the way i did it.

[rayray]

you might want to refer to Steve Meisner's guide. he's on this forum quite often so he could tell you more.

Meisner's Intake Installation guide

i have my own guide, but it's not complete yet. coming soon... lol




-rayray

[NonSense7]

88LE - stupid question, but what is the steel box connected to your intake pipe?

[X cam-tech X]

hey ray ray how is that a CAI ?? thats kinda how I got mine but My boy had his routed some way to where it was near the bottom of the car so would that link and description be for a CAI or just a custom intake?

[rayray]

On 2002-02-20 16:37, X cam-tech X wrote:
hey ray ray how is that a CAI ?? thats kinda how I got mine but My boy had his routed some way to where it was near the bottom of the car so would that link and description be for a CAI or just a custom intake?

sorry... i didn't say that I have a CAI. i was answering the original question at the top of the thread. he's just installing a short ram intake, not a CAI.

sounds like your friend has a CAI.

is that O-CAI?

peace
-rayray

_________________
1992 Camry LE 5S-FE
Edmonton, Alberta, Canada

<font size=-1>[ This Message was edited by: rayray on 2002-02-20 17:27 ]</font>

[X cam-tech X]

oh my bad bro... I must hvae misread your responce..