96 Camry intake installation.. - Toyota Nation Forum : Toyota Car and Truck Forums

Camry LE 94 · 04-10-2008, 09:33 PM

Hi.. I have a 96 Camry LE and I just bought a Weapon-R short ram intake for it... It comes with installation guides but I'm not too sure which pieces are what, such as the AIT harness, the 2.5-3" coupler, 10mm AIT grommet, the U-shaped bracket, etc.

If you could, please post the items i've listed above with their descriptions so I could figure this out. Thank you.

Black95Cam · 04-10-2008, 11:17 PM

do you have the v6 or I4?

Camry LE 94 · 04-11-2008, 10:53 AM

i've got an i4

nuchieboy · 04-11-2008, 12:00 PM

this is for a gen 4 but its basically the same thing
http://www.toyotanation.com/forum/t86710.html

Venom_5 · 04-11-2008, 04:57 PM

if that doesnt help, or you have any further questions ... i might be able to send you some pictures of my install (i have a 95 4cyl with a Weapon-R Dragon intake)

Camry LE 94 · 04-12-2008, 10:10 AM

alright, thanks guys. i have one other question... under the stock intake, there's an offset looking, triangular-shaped black box which connects to the bottom of the intake from it's top via the main rubber hose... it also bolts on to the hose. anybody know what that is? there's nothing on the new intake that connects to that box, hose or bolt.

Camry LE 94 · 04-13-2008, 01:15 PM

i believe the large, black box piece under the main intake hose is called the resonator... this piece has a few hoses that connect from the box to the top of the throttlebody. however there arent any inlets for these hoses on the new intake. i need help!