Gen3 bodykit, need opinions!

[shajbot]

RMM like Pussie and Tony






OR


Cyber (ViS) like prnc






I think the RMM looks much aggressive while the Cyber is kind of laid-back and cool. Let me know what you guys think even if you're not a fan of bodykit. Thanks

[Venom_5]

RMM isnt a kit, and there are 2 different RMM front bumpers: The Gen 3, and the Gen 3.5 (one wont fit the other unless you make major modifications to your bumper)

i am not a fan of kits at all, so i voted stock - the only exception is when you are mounting a FMIC, i think its dumb to leave it stock when there is a better alternative out there [notice that swegyptian's IC is mounted nicely for good flow, but still covered by the RMM front bumper .... much better than the OEM would]

neither the Gen 3 RMM nor the Cyber follow the OEM lines well ... the Gen 3.5 RMM Lip does a better job of following the Gen 3.5 lines, but it often leaves the car with an unbalanced look without side skirts and a rear bumper

Miltdoggie did a good job of selecting side skirts & a rear bumper to match the Gen3.5 RMM Lip, but i still think the car looks just fine stock

btw, im glad someone was looking at my Gen 3 Shrine

[shajbot]

Originally Posted by Venom_5

RMM isnt a kit, and there are 2 different RMM front bumpers: The Gen 3, and the Gen 3.5 (one wont fit the other unless you make major modifications to your bumper)

i am not a fan of kits at all, so i voted stock - the only exception is when you are mounting a FMIC, i think its dumb to leave it stock when there is a better alternative out there [notice that swegyptian's IC is mounted nicely for good flow, but still covered by the RMM front bumper .... much better than the OEM would]

neither the Gen 3 RMM nor the Cyber follow the OEM lines well ... the Gen 3.5 RMM Lip does a better job of following the Gen 3.5 lines, but it often leaves the car with an unbalanced look without side skirts and a rear bumper

Miltdoggie did a good job of selecting side skirts & a rear bumper to match the Gen3.5 RMM Lip, but i still think the car looks just fine stock

btw, im glad someone was looking at my Gen 3 Shrine

They don't follow the OEM line that's what I need. I like gen 3 head lights but the grill and bumper are just a little too thin.

You see it when you take out the grille, the front immediately looks more aggressive.

[Venom_5]

so then clear your grille


even if you dont like the OEM lines, body kits dont replace them - they just clash with them because you will see both styles...

oh, and here's a Gen 3 with the Gen3.5 RMM Lip & a Cleared Grille:

[cykaaro]

Like the look of the RMM myself, which I want to get. Just have to wait until I do a few other things first. Unfortunately shipping to here just sucks, especially since it's UPS
Definitely looks better IMO with side skirts than not.

[LazyAccent]

^ nice pic there uh umm lenny haha. and yeah if it was me i wouldnt kit my car not a fan of body kits and if it was the rmm lip. i would get that if it serves a purple like for an IC or suming..

[ONE_to_HATE]

Originally Posted by Venom_5

Oh ME oH MYYY..





you shoulda turned on ur bumper lights.

[Venom_5]

what i shoulda done is fixed the passenger headlight ... still looking for something about 1500 grit and polishing compound, even though i dont have a buffer

[ECale3]

RMM 3.5 Front Lip, Side Skirts, and Rear Bumpers.

[SmartedPanda]

Why does the RMM body kit look so different from all three pictures?
Look at the side "Vent" of the front bumper, the top post, 2nd picture compared to the bottem picture (above me).

RMM looks the nicest with a good drop and no spoiler.

[Venom_5]

there is no RMM body kit, like i said the first time ... read my first reply

[DAMON]

stop quivering over the terminology of "body kit" vs. "lip kit." Its annoying and they all are the same basic idea, it doesnt matter

There are 38574534885934 threads about the RMM lips on TN, check them out. Sorry, I am grumpy today and my Amp hasnt kicked in yet

[ECale3]

Originally Posted by SmartedPanda

Why does the RMM body kit look so different from all three pictures?
Look at the side "Vent" of the front bumper, the top post, 2nd picture compared to the bottem picture (above me).

RMM looks the nicest with a good drop and no spoiler.

Because the ones in the pics i posted are Gen 3.5 RMM lips, and the ones in the first pics are Gen 3 RMM lips.

Also the ones in the bottom pics have side skirts and rears from misc kits.

[Venom_5]

damon, theyre not even KITS ... thats the main point im trying to get across

the RMM Lip is a single piece, for the front bumper - a kit is usually 4 pieces, for the front/sides/rear...

you know that nobody uses the search feature, so its just easier to make the point everytime

[bigbird]

op...are you lookin for a lip or full body kit? buying a full one i think will look better then just the lip so id say the cyber one looks better but if you wanna spend more on it then piecing together a kit using the RMM lip looks reall good.