Bi-Xenon retrofit - Toyota Nation Forum : Toyota Car and Truck Forums

camry314 · 08-30-2008, 12:39 AM

Has anyone tried doing a bi-xenon retrofit? I am in the process of researching it and looking for parts right now, but I am curious if the OEM housing will have enough room to house the projector with all that extra stuff on there. Any thoughts?

Creeps228 · 08-30-2008, 12:45 AM

i got bixenon projectors on my car, fx35 projectors but bronzemaxell did the retro for me

uibalnme · 08-30-2008, 01:00 AM

Do you have a gen3 or gen4? I just did a bi-xenon retrofit on my 96. If you get a set of bi-xenon projectors and shrouds from a mercedes it should all fit just fine. Light-rings("angel-eyes") will work as well, but they will make the install a bit more complicated, and time comsuming.

camry314 · 08-30-2008, 01:02 AM

I have a 3rd gen. I was looking at using Merc E55 bi-xenon projectors.

***darksparkz*** · 08-30-2008, 01:03 AM

Acura TL projectors are very good as well, sharp line with great color for a good price, I believe they have a 3" diameter and should fit in most housings, not sure which generation of Camrys you have though.

camry314 · 08-30-2008, 01:10 AM

I have a 9006 6000K MTEC HID kit, and was thinking about using Acura Integra projectors since the Integras use a 9006 as a low beam in the projector. The pattern seems to be pretty good too.

JayMax03 · 08-31-2008, 03:12 PM

is there some sorda website or something to get custom made projectors at?

desentrix · 08-31-2008, 05:48 PM

you can refer to hidplanet.com as a reference.