driving//fog light to suit?

[blitzer_26]

hey people,
i was having a look at the front of my '94 Camry today and wanting to install driving//fog lights, the wiring itself wont be an issue or shall come later but the question is...

"are there fog//driving lights that will fit nice in the areas shown below?"


I've seen plenty of pics that have lights installed in the middle section but i like the look of them in the side alcoves.

EYEBALL96 has them installed on his 94 SE ...but they are the round version, are there a more square version to suit? [[by the way sweet ride eyeball96]]

[bigbird]

thoes fogs on eyeballs car happened by chance. someone jsut tested them out one time to see if thed fit...and they did. they are stock fogs from another car but there are plenty of lights out there, try just goin to a junkyard and lookin for some that may fit.

[midnightmach]

Hella FF75

[xtremeskier97]

Originally Posted by bigbird

thoes fogs on eyeballs car happened by chance. someone jsut tested them out one time to see if thed fit...and they did. they are stock fogs from another car but there are plenty of lights out there, try just goin to a junkyard and lookin for some that may fit.

They are from an Oldsmobile Alero.

[uibalnme]

Originally Posted by midnightmach

Hella FF75

Those FF75 lights match the gen3 very well. The Alero fogs are ok in the gen3, but look factory on a gen3.5 like my car......

[TheKevin]

here's mine

[cruisn76]

Originally Posted by Mr. E

here's mine

Hey MR E. What model is that fog? Where did you get it?

[TheKevin]

Originally Posted by cruisn76

Hey MR E. What model is that fog? Where did you get it?

Hella Optilux 1450 from http://www.truckcustomizers.com/prod...4HLA264.6.html

I added HIDs so make sure w/e fog lights you get, make sure it has glass lens and metal housing. I also added yellow overlays from BlueBatMobile.

[eyeball96]

The Alero fogs are ok in the gen3, but look factory on a gen3.5 like my car......

I agree they do look good on ur 3.5, but u had to cut ur bumper. That isn't necessary with a Gen 3, to install them.

[camrytrippin]

uibalnme what type of fogs are on the black on those look great?

[camrytrippin]

Mr. E what head light bulbs are those?

[blitzer_26]

awesome! is seems they are out there...i'll just have to have a look around, im liking the Alero fogs but i may have to get them shipped. maybe i'll just hit the wreckers and have a browse.

cheers for all the replys....much help

[TheKevin]

Originally Posted by camrytrippin

Mr. E what head light bulbs are those?

Headlights:
HALO 6000K HID Kit

Fog Lights:
VVME 4300K HID Kit

[uibalnme]

Originally Posted by eyeball96

I agree they do look good on ur 3.5, but u had to cut ur bumper. That isn't necessary with a Gen 3, to install them.

True, but the whole install only took me 30mins(w/o the wiring of course). The air can still pass by the lights even though the lights take up most of the opening.

The fit just can't get any better than this...

Originally Posted by camrytrippin

uibalnme what type of fogs are on the black on those look great?

Not sure what you mean by "on the black." The fogs under the turn signals are from a Olds Alero. If you're talking about the headlights, those things are just gatling gun shift knobs I used to fill in the empty high beam areas when I installed my bi-xenon projectors.

[Zviator]

Hey people, I wanna put fog in the place of signal marker. Is the factory wire good to go ?