My turbo Camry.

[Marcus81184]

.

[95PimpingCamry]

Looking good. Make sure to post some dyno sheets when you finish tuning.

[Venom_5]

250whp or go home ... in for the dyno sheets

[Zviator]

v6 huh ? 300whp go hard or go home

[Spitfire]

as long as he tunes is all good ^

Or he will not be able to go home except for tow truck

LOOKS GREAT! cant wait! post some vids!

[Venom_5]

Originally Posted by Marcus81184

I lowered the boost to be safe. I need to raise it again. I highly doubt the transmission can take 300 whp, but we'll see.

valve body upgrade FTW

[old red]

what's your fuel system?

[Venom_5]

id think stock injectors would be a big bottleneck ... and removing a/c is silly, you can mount a tranny cooler and keep your a/c

[old red]

Originally Posted by Marcus81184

Stock injectors. Stock + 255 lb walbro. E-manage blue to adjust. I may recalibrate my fmu, if I run lean.

blue e-manage?!
this means you have ecu pinout?

[aznstylez]

Originally Posted by Marcus81184

Just out of curiousity has any of the other turbo 1mzfe's posted their whp numbers?

Well Tony The Tiger is at 520whp and still going. Hit him up.

[Zviator]

I believe he also has 4 speed auto tranny.

[Venom_5]

Originally Posted by Camricer

I believe he also has 4 speed auto tranny.

factory auto tranny ... but built, AFAIK

[94CoupeV6]

Seen this car on MNSC. Keep us updated!

[bigbird]

mmm...sludge. and finish painting that intake plenum.

looking at your engine bay id be hard pressed to even tell ya have a turbo with all the black tubing. looks sleeper.

[Luckynumber5]

If the wastegate spring is weak it will not hold the wastegate closed. A vacuum/boost leak on the wgate will cause overboost, not lack of boost.

As for the knock sensor relocation idea, the m45 based trd supercharger puts out way more heat and stress on the engine. The guys with the superchargers still do the knock sensor relocation and it seems to pick up true knock just fine.