FSB for a gen 3.5 Camry

[96JDMCamry]

hey guys just wanted to get enlightened on this subject, what are my options in this department for better handling and fitment?

[Venom_5]

front sway bar?

i found ones made by Addco, but thats all so far ... some people will say it will increase understeer since you are stiffening the front suspension but it will also dramatically decrease body roll

your best bet would be a TRD rear sway bar + a good set of coilovers ... a front strut tower bar would help too, but it will give you the least gains out of all the things mentioned above

[bigbird]

as venon has said its a topic of debate wether it really helps more then it hurts. i can tell ya megamac has one on his gen4(4cyl + coilovers, bushings and RSB) and he says he hasnt had any real issues with understeer.

[uibalnme]

Do you have an I4 or V6? If you have a V6, you could get an OEM FSB from an I4, because the I4 FSB is bigger than the V6 FSB. It should bolt right up.

[96JDMCamry]

i have a I4 but my goal is to stiffen up the car in corners, i have already dropped my car ( H&R and Tokiko blues) and i want to buy a TRD rear sway bar... or a whiteline i guess

[bigbird]

get the RSB first...if thats not enough then consider the FSB.

[96JDMCamry]

ok... so anyone selling a TRD RSB for a solara 99 thats willing to ship to canada?

[cruisn76]

^ Go to your local Toyota Dealer and order from them. I got it for under $200 shipped to my dealer in Toronto in like a week. This is the part number. You will also need a factory gen4 cmary RSB bracket to make it fit better

Alternatively check out this thread: it is on sale on ebay
TRD RSB for $120 shipped on Ebay

[cykaaro]

What dealer, and how much under $200? [including tax?] Went to see a out one in the fall and said they were back ordered and couldn't get one.