v6 rear disc swap cost?

[ToRn]

for you guys who done the rear disc swap how much did it cost you for all the parts at your local junker so i can get an idea of what i should expect to save before attempting it. and was it from a v6 cam or es300.

[ASG14]

About $200. BUT all depends how cheap your junkyard is. I'd pull the Lexus ones since they are bigger.

You need to pull the entire backing plate with all attached parking brake hardware, Caliper, Caliper Bracket, Brake like, and Parking Brake Cable.

The Hub is the same.

[ToRn]

Will there be additional special tools/hardware for this job and whats the estimated time for pulling the parts off? also asg can you unblock from aim? lol. my sn's Gumanchudie.

[Zviator]

Good infos, may I jack this thread a bit:

Is there any other subtitude model that we can use instead of gen3/4 v6 or es300 ? Both gen es300 1 and 2 would work ?

Thanks,

[rusty9]

if you are interested, i have a rear disc setup from a 93 cam for sale. save you a trip to the junkyard =)

[RichieRichJP]

hint: I'm selling es300 rotors...

[Manny1337]

man i cant wait to actually swap mine out. i need to take a trip to ct though no junkyards up here have anything i want. ever.

[ASG14]

http://www.selfserveparts.com/

I like that place. Not been there in a couple years though.

[Manny1337]

thats a far ways away from me . like a 3 hours drive haha though it would give me an excuse to drive the cam

[ASG14]

It;s a pick and pull, and it's not 3 hours away. It was like 2.5 hours from Hartford when I used to go.

[Manny1337]

okay well 2 hours. but either way thats almost into cape cod. maybe ill go to cape cod and stop there on the way =P