Project: 1992 Camry LE (56k not-friendly)

[n3rdifed]

well ive been working on this cam for about two years and i just wanted to keep everybody updated and would appreciate some feedback

1992 Camry V6 LE

Exterior:
garage door lip
Nokya yellow fogs (stage one)
trunk lip (ebay)
ALL red tail light & signals
LED lisence plate lights
LED reverse lights

Interior:
ALL led interior
ALL led cluster (soon to be all led climate control)
Carmate Woodgrain drink & ciggarete tray
Carmate Woodgrain trash bin
Junction Produce Black Fusa (looking for a gold kitsuna)
Galahad rear view air freshener
1000W Kicker Amp 6 Channels
400W 10 inch eclipse with original ported box
Stock Speakers wired to Amp
Old ass kenwood amp

Engine:
Custom Cold Air Intake

Suspension/Wheel:
Tenzo Drop Springs (2 inch)
Stock Struts
Lexus LS400 stock alloy
225 50 16
(looking to upgrade to some gold 18's w/ chrome lip)

Future upgrades:
Yellow High Beams (being shipped)
Springtech Camber Bolts (1.75 + -)
Ksport C/O
Interior Dash Trim
Clear Depo Headlights and Bumper Signals
Ventshades on all 5 Windows
D1 grounding kit
Exhaust..dual tip muffler, wanna get something that will bring out the v6 sound..not looking for performance

ok heres the pics!

[PortugalFocus]

Looks great man. I really like the front bumper with the fogs, looks OE.

[camry314]

Do you have any close up pics of the front bumper and the garage door lip? Any of the fog light light install? What are the fogs you did install? I saw "Nokya yellow fogs (stage one)" in your description, but I thought those were just bulbs. I am interested in doing something similar.

[SHIROAME]

love those front lip... very nice

[FLIP K1DD]

i request you tell me how to do this "Garage Door Lip"!! lol its nice. i wana do it too. plz

[islandboy57]

I really like the LEDs, especially the instrument cluster - reminds me of the older EL Lexus gauges. I also like the fog lights

I don't really care for woodgrain stuff though, but that's just my personal perference. I think newer LS rims would be nicer *but* I've still got my steelies so I'm the last one who should be saying anything

Anyway, haven't seen you around yet but I'll keep an eye out!

[bigbird]

looks pretty good man.

[n3rdifed]

wow everybody still asks about the fogs and home depot lip.

i got the lip from a local hardware store..look in the section of the automatic garage doors and find the door seal. you know, that thing on the bottom that lines the garage so water dosent get in. the rest is just simple. go under your car and start from one end of the bumper and work your way with something to keep it staying there. washers with bolts will take a long time but is much better than screwing 30 nails into your bumper like what i did...

the fogs are from walmart. they should be easy to find but the kit sucks at describing how to wire them.

[eyeball96]

That lip does look sharp color matched, Good Job!

[n3rdifed]

Originally Posted by eyeball96

That lip does look sharp color matched, Good Job!

thanks.
www.paintscratch.com
i ordered a 12 oz spray can and im waiting for checkers to restock clear coat

[FLIP K1DD]

I just did the custom depot lip. Looks great except for the fact that the doulbe sided tape i use was white. So it shows a little bit. Might redo it or if i can paint the showing spots black

I also bolted it on..bit drivong on hw speeds will it flap or rip off?

[2wickedtoyz]

i like the look of the rims without the center caps your car looks great and i'm really liking the classy cup holder on the dash.

[n3rdifed]

Originally Posted by FLIP K1DD

I just did the custom depot lip. Looks great except for the fact that the doulbe sided tape i use was white. So it shows a little bit. Might redo it or if i can paint the showing spots black

I also bolted it on..bit drivong on hw speeds will it flap or rip off?

yeah it will fly off. thats if you used the white double sided sticky tape.
try find the extra strength one. its black and thinner with a red backing. washers and bolts for the win.

anybody know whats the maximum fitment for rims on a camry?
im thinking about getting 18's with crazy with + offset STAGGERED..

[gyz1893]

wow, sweet looking camry. i love the LED's and the all red tail lights. You might want to block out your license plate from the pic.

Can you please PM me how you changed the lights in the instrument cluster and what kind of bulb you use? Thanks

[n3rdifed]

good news everybody!

my camber kit and high beam yellows came in today. ill probably install the bolts sometime this weekend (hopefully) and ill post up more pics of the results.



gyz1893 use the search button on how to take out your cluster and replace the bulbs. i got my bulbs from a auto store that specalizes in LED cluster and all around bulbs. im not sure what the number is though..but you do need two seperate types of bulbs to change majority of the orange to white. the best way i did it was to take out each bulb and replace it one by one and check to see if the polarity of the led is right or else youll have unlit areas on the cluster which is..bad.