Quick Q: Bearings...

[ekopel]

Hey guys,
so as some of you know im doing a rebuild. my question is about main bearings on a 1mzfe.

there are two "sets" so to say of bearings. When installing them, do the bearings with the groove go in the main cap or in the block? answer was not in the haynes manual.

thanks,
eric.

[Red_T_SwiftCam]

Originally Posted by ekopel

Hey guys,
so as some of you know im doing a rebuild. my question is about main bearings on a 1mzfe.

there are two "sets" so to say of bearings. When installing them, do the bearings with the groove go in the main cap or in the block? answer was not in the haynes manual.

thanks,
eric.

Don't you remember when you took it apart? The bearings with the groove need to go in the block the bearings that have a smooth finish need to go in the main caps.