Front Door Panel

[the_professional]

It's been a while since I ripped off my front door panel.
So maybe Adam,eyeball, or bigbird, could hit me up quick, or anyone for that matter.

But, once I remove screws and such, where & which way do I pull the door panel off. I know there are brackets on the bottom of the panel, but I can't remember which way to pop them out without ripping off the brackets.

[whip_cracker]

You taken the window winder off? The screws from in the arm rest bit and all that? Also all the tabs along the sides...

What I do is pull the bottom part to get those connector parts out and lift upwards off the door itself.

I've pulled these off at least 10 times when doing the speakers and retrimming the doors

[the_professional]

thanks whip cracker.
yeah, everything is off the door. I pull up, but I remember there was a certain way to pull the bottom part of the panel off, so you dont rip off the metal brackets on the panel. do i just pull the bottom outward, or upward?

[whip_cracker]

I pull mine outwards... there was 3 plastic connectors or so from memory.

You should be able to sit on the ground and lift the bottom of the trim away from the door itself... you'l be able to see the connectors start coming out of the metal frame on the door mate.

Good luck

[Mike Gerber]

This should help with your question about door panel removal. It's very detailed and it's on a 92:

http://www.rayrayonline.bravehost.com/frontspeaker1.htm

Mike

[the_professional]

Thanks, I didn't remember who to not rip out the bottom four clips. I guess just pull up. (hopefully)
thx guys!

[whip_cracker]

No worries mate...

I just had all four taken off yesterday - got the car re-tinted :P So I got to watch someone ELSE doing it instead of me for once

[the_professional]

thx!

i was gonna pull it off today, but I got caught up in wiring fogs.

so hopefully trw.