where is a tachometer wire on camry 99

[smilecow]

I am trying to install a remote starter but I can't find the tachometer wire on my 99 camry.

the12volt says "Tach Yellow/Red AC Or White/Red(4+6 Cylinder) Ignition Driver's Shock Tower"

I don't know where driver's shock tower is. is there any body have some pics for that?

second question is

I am going to install a trunk release. the12volt say about " trunk pin"

what is that? can I ignore that for the feature of trunk release?


my last question is about accessory wire.
the12volt says "test as ignition." does it mean to connect it to ignition 2 wire? it looks like that the ignition 2 wire and accessory wire have the same color.


thank you

[abew330]

driver shock tower is the top of the strut

truck release, does the gen 4 have power trunk release? if not you should be able to tap into the trunk light for trunk trigger

[smilecow]

thank you,abew330. It looks like the wiring is different from the12volt.com. Where did you get that information?

[abew330]

your right.

i double check wire info on another website not 12volt and here is what i got


12 VOLTS CONSTANT is WHT/RED & WHT at IGNITON SWITCH HARNESS

IGNITION 1 is BLK/YEL at IGNITON SWITCH HARNESS

IGNITION 2 is BLK/RED at IGNITON SWITCH HARNESS

ACCESSORY is BLU/RED at IGNITON SWITCH HARNESS

STARTER is RED (+) at IGNITION SWITCH HARNESS

PARKING LIGHTS is GRN (+) at WHT PLUG BOTTOM LEFT OF FUSE BOX

DOMELIGHT is RED/WHT (-) at TOP RT OF FUSE BOX WHT 14 PIN CONN

PWR DOOR LOCK is LT. GRN (-) at DR KICK PANEL WHT PLUG

PWR DOOR UNLOCK is GRN (-) at DR KICK PANEL

TRUNK RELEASE is BLU/BLK (+) at DR KICK PANEL

TACH SENSOR is YEL/RED or WHT/RED at Igniter DRIVER SIDE SHOCK TOWER

BRAKE is GRN/WHT at WHT PLUG BOTTOM RT OF FUSE BOX

FACTORY DISARM is RED/GRN (-) at DR KICK PANEL WHT 24 PIN CONN

[smilecow]

thank you again, abew330.

I have a question. there are two ignition wires on my car but there is only one on my alarm system.

Do I have to use a relay?

[abew330]

what alarm are you installing?

[smilecow]

a cheap non-brand one. I think that my friend will install that this friday for me
. After that, I'll post every pics for other diyer

thank you, abew330