Another Seafoam Video

[EEngineer]

I know everyone's done it but i just can't help to film it and put it on youtube.

here's the first seafoam i did since the engine swap. During the engine swap a lot of parts were cleaned but we could tell that there's some gunk inside and since everything else was in good order, I had no worried about seafoam not being good for the car.


here's the video. i started revving a lil after 2 minute mark...there were quite a bit of smoke after 1 minute mark lol

You Tube

You Tube

hopefully I'll get to do a real driving video with some help.

[haux]

Originally Posted by JJJJJJ

Next time try 2-butoxyethanol or butyl-cellulose, repackaged and sold by Toyota as EFI cleaner (schrader attachment), GM Top End cleaner, or Mopar Combustion Chamber cleaner are all superior to Seafoam in cleaning intakes and combustion chambers. They are manufacturer approved and tested for use by dealers - unlike Seafoam (naptha oil and isopropyl alcohol mostly) which is sold by a distillates sales distribution company. The dealer approved products are also cheaper and have better chemical cleaning properties than Seafoam.

Dealer approved may also = less effective though, methinks.

Anyone tried these other products?

[Eye8Pussies]

plenty of carbon in there to get out as for other cleaning agents...not sure- but they are all fairly similar.

even simply spraying water into your combustion chamber (i.e. water injection) will do a lot of cleaning and lave the combustion chambers sparkling clean



and cody - we'll go do some drive-by videos, etc in the new year!