2000 camry drl?

[00camryxlev6]

hey im working on a project on my camry which requires me to kill the drl, anyone know the best was to do this? any help would be great thanks.

[00camryxlev6]

I did find a relay that i can remove, but it leaves me with just one highbeam, if this is my only option i might just do that and jump the other highbeam with a relay...

[projektvertx]

Free bump, that's a clean ride you have buddy!! The main relay for the DRL's on a gen 3 is located right below the dash, near the steering column. Im not sure where it is for the Gen 4 thought... Check out the wiring diagram for a Gen 4 on this website, it should help ya out! You want to disable the main DRL relay:

http://www.camrystuff.com/index.php?page=Gen4_Manuals

This website is a great reference

[00camryxlev6]

hey thanks, ill check it out. do you know right off hand if the high beams will still work if the main relay is disconected once i find it....

[projektvertx]

Originally Posted by 00camryxlev6

hey thanks, ill check it out. do you know right off hand if the high beams will still work if the main relay is disconected once i find it....

Offhand, I don't know unfortunately... But I would tend to say they would work since most US cars are rolling around without that relay and circuit, maybe someone else can chime in and confirm this??

[CAMRYTUNER20]

All that is did to disable my drls was unplug the resistor that is located in the upper left hand corner of the engine bay. It says " danger HOT" or something like that. Or you can take pin number 23 of of connector D6 if you are absolutly sure its a 2000.