Need Complete Exhaust! Options?! - Toyota Nation Forum : Toyota Car and Truck Forums

JBlacks · 07-08-2010, 01:48 PM

I have a 1993 camry v6 that needs new exhaust from the exhaust manifolds back, what are my options? Ive found oem style replacements on ebay and have contacted a custom shop waiting on a quote. Are there any full camry exhaust systems that are quality, performance and aftermarket that i dont know of? also is there anywhree you guys would point me for parts besides ebay? thanks

ps_outrage · 07-08-2010, 03:48 PM

search amazon for MagnaFlow they have OEM direct fit for the camry, youll get performance

Amazon

JBlacks · 07-08-2010, 04:08 PM

looks like all they have is a cat.

***LynchburgCSI*** · 07-08-2010, 04:18 PM

OBX header from the gen 4 camry is an almost direct fit and good for a few ponies. Any of the gen 4 stuff should fit fairly easily. Heck, I think bigbird has a full meagan racing cat back with the OBX headers.

edit: 1993... my bad. The OBX headers are for the 94+ V6 with the 1MZ. You have a 3VZ.

DrXenon · 07-12-2010, 07:15 PM

I have used two after market catalytic converters + pipe largely because Toyota charges $1050. The rear (cat back) dual muffler assembly I bought from Toyota because it did not appear overpriced for the quality and it is still looking good after 4 years. I found the after market (NAPA and Parts Source nameless) lasted 2 years each. The latest, number 3 was made by Bosal which I bought from Rock Auto Wi. and installed yesterday, it fit well and looks well built.
I passed auto emissions today with unbelievably low readings. Previous test failed on three counts on HC, CO and Nox which was triple the pass number. I took the gamble and did not get the diagnostic and i am happy it worked out for the best. This was for a 97 Camry 5SFE. On reading Cat warranties i found they are not worth the paper they are written on, weasel clauses up the ying yang.

bigbird · 07-12-2010, 07:32 PM

best solution is to source a used OEM Ypipe, get a magnaflow cat(highflow or not) then either buy a gen4/solara catback and have the hangers modded to fit or get an OEM catback from a junkyard car. performance gains on an OEM setup can only be had at the cat and the Ypipe...everythign else flows pretty well for stock.

azcat90 · 08-24-2010, 10:55 AM

Does any of this involve welding?