3vz fe performance

[MR2runner16]

just go a 3.0L 3vz fe out of a 1992 ES300. Looking to do some major performance mods. Does anyone know where you can get a set of forged pistons and rods? Has anyone ever heard of people boring out the cylinders? I plan on building the motor up and boosting it......any help is appreciated!

[chronoti]

search

and look at trd4life (gabe) glp motor he got the mad hookup on them parts

[rusty9]

I got a set of arias forged pistons from a guy under the name of sea2sky tuning, possibly from the tacoma forums. i dont know if he has any left, but its worth a shot. i got them for a steal at $400. a machine shop should be able to make crower rods from a 22re fit. crank is forged so you dont have to worry about that. other than that a real good port and polish from the plenum down and 3 angle valve job should land you a nice motor.

[MR2runner16]

Thanks guys... imma try lookin for those forged pistons. Anyone try using different injectors or a piggyback system?

[4Cyl'erThriller]

SEARCH SEARCH SEARCH... There are a bunch of free mods for the 3vz to make a bunch more power without doing any real mods. A y pipe (not free)The timing mod (free) and there is a cog mod too also free. + the P&P will gain quite a bit of extra hp on this motor.
heres some reading for ya.
http://www.mr2.com/forums/v6-owners-...toyota-v6.html
http://mr2wiki.com/MKII/3vzfetune
3vz-fe ECU enhancements?
Im sure theres more stuff on here but this should get you started.

[Chris Crash]

A ground set of cams and crank should help you out pretty well too....PM me for details.

[LynchburgCSI]

Search. Closed.