Alloy fitment prodlem 95 2.2

[doozergreengrass]

Hello people!

Just having some doubts while fitting some 2nd hand alloys to my 2.2 95 camry. These are the alloys in question off the bay: http://www.ebay.com.au/itm/120810462...84.m1438.l2649

I was told these came off of the V6 version camry over here (Vienta). Are these alloys interchangable?

Can the wheel nuts off the stock rims be used on these alloys or do they require special nuts?

I think I have made a critical mistake and gotten rims with 114 pcd rather than 114.3. Unfortunately I can't find any info inside the alloy rims to confirm whether they're 114 or 114.3. Are these interchangable?

REally appreciate any info as I have put 2 of these 114's on the front of my car and are undecided whether to proceed or abandon fitment!

Thanks

[hardtopte72]

IF they are 114 or 114.3 they should still work especially if they came off another Toyota. You just need to make sure the hub center is at least 60.1 mm. As far as the wheel nuts it is hard to say. Most times no and you would need to buy some aftermarket sport type wheel nuts.