TSB EG056-06 Revised again

[njerald]

EG056-06 ECM CALIBRATION: ENHANCEMENT TO SHIFTING PERFORMANCE & SMOOTHNESS (REVISED)2007 model year Camry vehicles equipped with 2AZ-FE engine and 5-speed automatic transmission produced BEFORE the Production Change Effective VINs shown.

5/8/2007

To enhance shifting performance and smoothness during acceleration, the Engine Control Module/ECM (SAE term: Powertrain Control Module/PCM) calibration has been revised.

NOTE:
�� Version 14.1a or later Diagnostic Tester software is required to perform this procedure.
�� Before proceeding, verify the ECM (PCM) calibration has NOT been updated by checking for the Authorized Modifications Label (shown in step 1 of the Repair Procedure).


Change -JAPANESE VIN NUMBERS REVISED

[DiLan]

umm... Could you post it up on another site? Tundra is saying members only :|

[geoff5093]

I dont have an I4, but is that suppose to help minimize the "lag" when accelerating from a stop?

[netman]

Originally Posted by njerald

EG056-06 ECM CALIBRATION: ENHANCEMENT TO SHIFTING PERFORMANCE & SMOOTHNESS (REVISED)2007 model year Camry vehicles equipped with 2AZ-FE engine and 5-speed automatic transmission produced BEFORE the Production Change Effective VINs shown.

5/8/2007

To enhance shifting performance and smoothness during acceleration, the Engine Control Module/ECM (SAE term: Powertrain Control Module/PCM) calibration has been revised.

NOTE:
􀀀 Version 14.1a or later Diagnostic Tester software is required to perform this procedure.
􀀀 Before proceeding, verify the ECM (PCM) calibration has NOT been updated by checking for the Authorized Modifications Label (shown in step 1 of the Repair Procedure).


Change -JAPANESE VIN NUMBERS REVISED

Thanks for the info..

Btw, anyone know why some models are Japan built and why not all US built?

[njerald]

Originally Posted by netman

Thanks for the info..

Btw, anyone know why some models are Japan built and why not all US built?

Like they are selling more here than they can make here.......................