2007 camry lowering springs beyond 2"

[moky-tron]

i recently found a manufacturer of springs here in vancouver, bc canada. they go under the name of canuck motorsports. they sell stuff in ebay under springtech

http://www.canuckmotorsports.com/store.html

seems like they manufacture springs here. i contacted them and inquired if they would be making springs for the 07 camry. pretty cheap. $175 cad. i checked their feedback from the local car club, no one has said anything negative about them and they have a no sag warranty. some local guys use these springs to autocross and have used them for 3 years and still no sag

now the big question, how many of you guys want to have springs which can get our cars lower past the eibach/trd mark of around 1.2"/1.5"? i noticed too that they make lowering struts and shocks, so maybe the can make a performance combo for our cars.

i inquired already if they would be willing to make something along the lines of 2-2.5"

[Netforcer]

springtech has been out...
http://www.toyotanation.com/forum/t140400.html

people advise to stay away from springtech and sprint springs...
Also I think the majority of the ppl on this forum care too much about their cars that they won't drop 2-2.5 inches without a good set of aftermarket shocks (which are unavaiable) plus the camber correction that comes with it

[moky-tron]

oh, i didnt notice that. thanks netforcer.

well, il still try to see what they can come up with since they arent too far from where i am

[Epsilon]

I didn't know about these springs lol.

[moky-tron]

the springs they carry have a 1.7" drop front and rear. to make a drop 2" and beyond, they would need a minimum of 50sets.

i inquired about their shocks to see if they will be making some too

[Netforcer]

don't want to be pessimistic, but 50 is a lot... try 10 or 20.. also if they agree to do shocks, might as well ask them to make coilovers instead

[moky-tron]

i will see what they can come up with. il try calling them tomorrow