Borla Exhaust for 2007 Camry V6 - Toyota Nation Forum : Toyota Car and Truck Forums

david borla · 10-01-2007, 01:18 PM

Hi,

This is David Borla from Borla Performance. Our exhaust rear section for the 2007 Camry V6 is also now available through standard automotive aftermarket parts distributors. This part IS NOT exclusively sold through Toyota dealerships. The Borla part number is #11758 and carries our million mile warranty. The same part from Southeast Toyota carries a 3 year/36,000 mile warranty.

Please use the dealer locator located on our website at www.borla.com to find a dealer near you.

Thanks for your interest.

geoff5093 · 10-01-2007, 01:25 PM

I went to the Borla website but I cant seem to locate the exhaust when browsing by selecting the 07 Camry V6 (all 3.5L models showed no results). Is it just not on your site?

david borla · 10-01-2007, 01:28 PM

Quote:

Originally Posted by geoff5093

I went to the Borla website but I cant seem to locate the exhaust when browsing by selecting the 07 Camry V6 (all 3.5L models showed no results). Is it just not on your site?

It will be uploaded to our website within an hour. Sorry for the delay and thanks for your interest.

cp44 · 10-01-2007, 02:06 PM

Any spec sheet on the performance improvements? Is this the same borla exhaust on this camry?

Borla Exhaust Pics!!!

is it $649.00 for both or each muffler?

david borla · 10-01-2007, 03:03 PM

Quote:

Originally Posted by cp44

Any spec sheet on the performance improvements? Is this the same borla exhaust on this camry?

Borla Exhaust Pics!!!

is it $649.00 for both or each muffler?

We only make one rear section for the '07 Camry so yes, if the one you are reffering to is in fact a Borla product then it is the same.

However, eventhough the product is identical, the warranty is not. If purchased through Southeast Toyota dealers, there is a 3yr./36,000 mile warranty. If purchased through the Borla aftermarket parts dealer network there is a 1,000,000 mile warranty (please see Borla warranty details at www.borla.com)

Prices will vary depending on the dealer so please do your homework.

Thanks

david borla · 10-01-2007, 03:05 PM

For pricing, please try Titan Motorsports at 407-277-8423

Netforcer · 10-01-2007, 07:44 PM

any talks about a full catback?

El Tano · 10-01-2007, 08:54 PM

David what about something for the 4 cyl ????

shinigaimi · 10-02-2007, 05:48 AM

Hope somebody buys them fast

and installs them and has some good feedback to offer!

***wireless*** · 10-02-2007, 07:12 AM

Quote:

Originally Posted by shinigaimi

Hope somebody buys them fast

and installs them and has some good feedback to offer!

I know Mrshyvely has it already installed...and a couple of others. Search on that user name with "exhaust" and you will find info.

2007xlev6 · 10-02-2007, 08:09 AM

Nice! I actually test drove a camry in columbus GA with the borla exhaust and some ground effects on it. It was an xle. But i ended up buying one back home here in florida it didnt have that special package though. Anyone know where to get those ground effects?

-Randy

geoff5093 · 10-02-2007, 08:33 AM

Quote:

Originally Posted by 2007xlev6

Nice! I actually test drove a camry in columbus GA with the borla exhaust and some ground effects on it. It was an xle. But i ended up buying one back home here in florida it didnt have that special package though. Anyone know where to get those ground effects?

-Randy

You should ask in a different thread, not this one.

I see the exhaust is now on borla.com for $649. Do those dealers actually have them in stock, or do they just install them?

mrshyvley · 10-02-2007, 09:41 AM

Quote:

Originally Posted by wireless

I know Mrshyvely has it already installed...and a couple of others. Search on that user name with "exhaust" and you will find info.

Yes, I have one.
Still love it, and it was easy to install.

david borla · 10-02-2007, 11:00 AM

Quote:

Originally Posted by Netforcer

any talks about a full catback?

If there's interest we can certainly make something nice however I am concerned that the extra material and labor necessary for the cat-back will make it too expensive for this application.

We use 300 series stainless steel (austenitic) exclusively which is the highest grade of material available for exhaust applications. As a result, our systems are more durable than those made from 400 series (ferretic) or inferior grades of stainless steel and will look and perform consistently for a million miles but they are also significantly more expensive due to the added nickel and chromium content.

Can you give us an idea of what the market will bare for a cat-back?

Thanks for your interest!

geoff5093 · 10-02-2007, 11:18 AM

Quote:

Originally Posted by david borla

If there's interest we can certainly make something nice however I am concerned that the extra material and labor necessary for the cat-back will make it too expensive for this application.

We use 300 series stainless steel (austenitic) exclusively which is the highest grade of material available for exhaust applications. As a result, our systems are more durable than those made from 400 series (ferretic) or inferior grades of stainless steel and will look and perform consistently for a million miles but they are also significantly more expensive due to the added nickel and chromium content.

Can you give us an idea of what the market will bare for a cat-back?

Thanks for your interest!

Many people say they would want one, but when it comes down to it they wouldnt buy it.

I'd say if you wanted to get a more accurate figure from us, you should tell us about how much it will cost for a full cat-back system, and how much power it will add (and also add over the current axle-back).