07 camry trunk + sub

[Fobanginvtek]

Sup guys I was wondering if you guys think a 13w7 in a prowedge box would fit in my 07 camry ce? Reason why I am asking is cuz my cars in the shop , and I have the sub already cuz it was such a good deal. Here are the demensions of the box

22-3/8"W x 18-1/8"H x 18-1/8"D1 x 11-3/4"D2

Height will fit? depth?

[Fobanginvtek]

someone bust out the tape measure for me! thump.

[LoudCamry]

i believe it will fit, i used to have a JL 12w7 in a prowedge box in my 2003 camry.

[Fobanginvtek]

Originally Posted by LoudCamry

i believe it will fit, i used to have a JL 12w7 in a prowedge box in my 2003 camry.

Ok, mines a bit bigger but the clearance and all was good right?

[LoudCamry]

your sub some fit with no problem, make sure you dynamat your trunk, those rattle is going to be annoying

[ebumdude]

Originally Posted by LoudCamry

your sub some fit with no problem, make sure you dynamat your trunk, those rattle is going to be annoying

Dont forget about the rear deck and the rear license plate as well.

[Fobanginvtek]

Originally Posted by ebumdude

Dont forget about the rear deck and the rear license plate as well.

yeah il do license plate...but im debating if i should or should not dynomat the whole trunk....Is there another solution?

[LoudCamry]

you can just sound damden the 2 rear side of the trunk and rear deck plus the trunk lid.

i used Fatmat for my whole trunk plus i add one more layer on the 2 rear side and used Dynamat extreme on the trunk lid, if you got the money go with the dynamat exttreme for everything.

i used about 50 sq feet of sound damdening stuff for my trunk and that is not enough

[Fobanginvtek]

Originally Posted by LoudCamry

you can just sound damden the 2 rear side of the trunk and rear deck plus the trunk lid.

i used Fatmat for my whole trunk plus i add one more layer on the 2 rear side and used Dynamat extreme on the trunk lid, if you got the money go with the dynamat exttreme for everything.

i used about 50 sq feet of sound damdening stuff for my trunk and that is not enough

Do you have any pictures of the work done?

[LoudCamry]

i will take more picture tomarrow to post, here is a couple of the trunk lid and side

[

[Fobanginvtek]

Originally Posted by LoudCamry

i will take more picture tomarrow to post, here is a couple of the trunk lid and side

[

Is all that stuff covered up? Whats your set up right now? I think im going to go with the Fatmat for my trunk. Thanks for the tip and pics!

[LoudCamry]

i cover most of the trunk. didn't do all the spare tire well, Fatmat is ok stuff, it will work but you will need 2 layer to equal one layer of dynamat extreme, Fatmat does get the job done, To bad the promotion code for the Edead expire, it was 50% off, i try to get some picture of my whole trunk later, i am currerntly running just a 1 Jl 12w6v2 on a JL 500/1 with a 6 channel A6540 amp for my mid and high, i am trying to sell my currernt sub and put 2 Jl 12w3v3 on but rear side of my trunk.

[akumaa]

customiz your box, i did. 13w7 + custom portd box is about 50-60, so you might need an extra hand getting it in the car.

i dont have my camera so i cant take any pics!

[Fobanginvtek]

Originally Posted by akumaa

customiz your box, i did. 13w7 + custom portd box is about 50-60, so you might need an extra hand getting it in the car.

i dont have my camera so i cant take any pics!

just put in the sub. getting it in the trunk was like a perfect fit, had to push a little but once its in there its perfect. good clearance overall.

[LoudCamry]

what type of amp are you running your sub to?? Jl 1000/1?? or 2 JL 500/1 to each coil???