|
03 camry 4cyl no-start help!
I recently had to replace a blown headgasket on an 03 camry 2.4L. I tore it all down had the machine work done to the head, put all new gaskets and everything on it and i cannot get it to start...i only have 1 plug that i cannot find a place to plug it in, it's a gray plug on the driver-side harness by the airbox. It's a 1-wire plug, the 02 sensor is plugged in, so is the other gray plug that goes to the head, any chance anyone could post a picture of their 2.4L engine or have any ideas on this? And would it cause a no-start? i'm getting spark and fuel i checked that....Any ideas would be great thanks.
|
Linear Mode
