OEM Brake Pad Bed In Procedure?

[LE05]

Is there a specific bed in procedure for oem brake pads like some performance pads have? or is a general bed in procedure sufficient?

[CharmCityES]

general break in is fine for oem pads...
all i do at work when i swap brakes (i work for toyota) is take it for a short test drive and carefully step on the brakes a few times and they break themselves in...

[the critic]

I use the 30-30-30 method for non-performance pads.

30 stops from 30 mph with a 30 second cool down in between each stop.

[CamrySExxx]

Originally Posted by the critic

I use the 30-30-30 method for non-performance pads.

30 stops from 30 mph with a 30 second cool down in between each stop.

seems very time consuming.

[omairtheman1]

this is my method for ceramic brakes

i just throw them on and drive cautiously for the first 50 miles or so...

they never warp nor did they ever glaze on me...

[LE05]

thanks for the input guys! on that note, does everyone check rotor runout when installing new rotors?

[jbergb5]

Brake Pad bedding procedure...
http://www.tirerack.com/brakes/tech/....jsp?techid=85&