BlueTooth - How to change the microphone volume on a NonNav Camry

[summerwind]

The following TSB has been created by Toyota to allow 2007-2009 Camry owners to adjust the microphone sensitivity so those you call can hear you better.

How to adjust Bluetooth microphone Volume (Non_Nav)

You have to be quick doing the "rub your tummy and pat your head" part of the instructions or it will not go into the Vol Type mode

I also noticed that to change the setting from 0 to something else I had to turn the TUNE knob instead of the VOLUME knob and then press the TUNE knob to store the setting

You just turn the ignition off after the last step

[njerald]

Mucho Gracias............

[coolbeans]

coolbeans
Thanks

[Ormazd]

I recently bought a 2008 RAV4, and have been troubled by the volume issue. I was excited to find this thread with a Google search. Unfortunately, try as I might, I have not been able to access the volume menu. I've performed all the steps within a few seconds, but no luck.

Has anyone else had this problem? Any other tips?

TIA

[SE_2007]

Sweet...............I think that there should be a TSB thread as well.

[SE_2007]

i can't get it to the vol. mode, i mean i did it pretty fast. it's just saying phone when after i press the vol + or - 3 times. I guess i'll just keep trying. but if you guys can give me some pointers that will be great. thanks

[SE_2007]

I can't get it to work........help please. when i press the off hook then volume up or down 3 times then the tune button, it doesn't say vol like the article it just says phone. I'm pretty sure i did it under 15sec. it takes for ever for the not link to show up when pressing the off hook switch. HELP.......i've tried this like 20 times and no progress.

[davidb4775]

Two questions:
1. If your phone is paired (as the bulletin says), do you do this process with or without your phone with you?
2. Will this process allow you to access the speaker volume control for incoming calls? I know how to adjust the instruction volume ("Press the talk switch and say..........") Its the volume of incoming calls that I need to adjust.

[SE_2007]

Originally Posted by davidb4775

Two questions:
1. If your phone is paired (as the bulletin says), do you do this process with or without your phone with you?
2. Will this process allow you to access the speaker volume control for incoming calls? I know how to adjust the instruction volume ("Press the talk switch and say..........") Its the volume of incoming calls that I need to adjust.

just use the vol control on your steering control, that's the only way you can turn up the vol.

[geo1nj]

Originally Posted by summerwind

The following TSB has been created by Toyota to allow 2007-2009 Camry owners to adjust the microphone sensitivity so those you call can hear you better.

How to adjust Bluetooth microphone Volume (Non_Nav)

You have to be quick doing the "rub your tummy and pat your head" part of the instructions or it will not go into the Vol Type mode

I also noticed that to change the setting from 0 to something else I had to turn the TUNE knob instead of the VOLUME knob and then press the TUNE knob to store the setting

You just turn the ignition off after the last step

[geo1nj]

Thanks
I called the dealer several times on this issue and they could never help. This was easily done and worked great.

[slaulau]

Originally Posted by geo1nj

Thanks
I called the dealer several times on this issue and they could never help. This was easily done and worked great.

I have tired many time and it doesn't work for me. I could get the "Not Linked" to display but whenever I clicked on vol + or vol -, the message went away and the phone connection then established.

[workerant]

Oh I need to try this. Always get complain that I speak too soft when I use my car bluetooth to answer phones.

[judge34411]

Hi,

Not trying to Jack the thread but since it is about blue tooth. Maybe someone could help. I have a 2010 everyone hears me okay so have never had to adjust volume but will mess with it just to see.

Now on a different note. I have to call alot of numbers that require me to dial an extension. Is there anyway to add a pause and then the extension? Right now I am dialing then hitting talk then saying extension then dial again. A long way of getting it done when in traffic.

Thanks in advance,

Happy driving.

[SE_2007]

I still can't get it done.....