Blue Batmobile - Toyota Nation Forum : Toyota Car and Truck Forums

CTMike · 06-11-2009, 09:15 AM

Im looking to get the blue batmobile 6/10 overlays with cutouts on my tail lights... I tried to PM him but he does not accept them.. How much do they cost? and how easy to install are they because i tried to do it with a cheap autozone tint and it was an epic fail it would wrinkle and ruin constantly due to the contour of our taillights.

***bandit*** · 06-11-2009, 09:24 AM

http://bluebatmobile.net/
http://s2.photobucket.com/albums/y42...ry%20Overlays/

email him at bluebatmobile@san.rr.com. he's rarely on the forums. Price is on his webpage. Just click on the image and it should show price. If not, email him.

Use soapy water when installing. Like you said, its like putting tints on. The soapy water allows you to move the film around and once you have it where you want it, you squeegee the soapy water out. If theres a crease, use heat gun to shrink that area.

CTMike · 06-11-2009, 10:28 AM

thanks

sfa500 · 06-13-2009, 08:26 AM

You need to know how to heatshrink tint inorder to install them. THe curve on the taillight is severe and the vinyl will not just squeegee on.

CTMike · 06-13-2009, 11:00 AM

Yeah i know how to its not hard... i just found out the last tint i bought was not vinyl and therefore would not shrink when trying to deal with the curve

Vken · 06-14-2009, 03:51 AM

it's better to paint it and put clean coat to make it look shiny. i did tried to buy lights covers from ebay but there is no shop can do it especially when they saw the curve of the headlight, my buddy who has hella experience about it, spent 2 hours with heat gun try to put the cover on the headlight but ended up broken it. Thus, i decide paint it and here is the result

Vken · 06-14-2009, 03:52 AM

and for the price of painting, only 150 for a pair

iluvbeatles · 06-14-2009, 05:30 AM

Good luck man...

DrewsCam · 06-14-2009, 09:00 AM

you mean clear coat them*

***bandit*** · 06-14-2009, 09:38 AM

Quote:

Originally Posted by Vken

it's better to paint it and put clean coat to make it look shiny. i did tried to buy lights covers from ebay but there is no shop can do it especially when they saw the curve of the headlight, my buddy who has hella experience about it, spent 2 hours with heat gun try to put the cover on the headlight but ended up broken it. Thus, i decide paint it and here is the result

No shop can do it? I wouldnt even trust going to any of them than. If they cant do taillights, theres no way they can put a clear bra on the front of the car.

Blue Batmobile · 09-08-2010, 04:32 PM

Great thing about vinyl is that you can always remove it if desired

.

Bat

BlackCam09 · 09-08-2010, 06:17 PM

is it hard to put on?? lol is it like tint?

ArmY1 · 09-08-2010, 10:47 PM

i bought the front eyelids and did it all with no water and no soap lol
,1st it was all bubbly but it came out great after a few days like tints but with the special liquid material

i rec-command buying the tint sprays and do it
they should cost about 35-50range for they overlays
email blue bat is best ,he'll respond
1st itz email
2nd write check to him it np, i thought it could been spam but wasn't blue bat is tru
3rd wait about 1 week your product comes

Check it out

[IMG]

[/IMG]

btw i just had my wheels all done today, i'll upload em on my thread when i have time guys

***coolhandsean*** · 09-09-2010, 01:31 AM

Not a good pick but you can kind of make out the overlays on the tails. I put them on myself and even with a heat gun and a lot of stretching I still managed to have some wrinkles along the curve of the tail lights. Not very noticeable until your 12'' away.

The Eyelids took 10 minutes to do and the soapy water made it easy to move around to get th eproper fitment. The eyelids needed to be stretched a little too so it would fit properly without any visible space.

Blue Batmobile · 11-02-2010, 12:12 AM

Any pics of the back?

Bat™