Engine mount repair questions

[xpeed]

Hey guys. I just found out that I needed new engine mounts when I was inspecting the engine couple days back. The car vibrates a bit when I accelerate and put it in gear. My mechanic estimated about $350 to replace the top mount and the front mount. Is $350 a reasonable price for these?

[gdanaher]

You call the dealer's parts counter, tell them that you need the top and front engine mounts and get the prices. Add in perhaps 1.5 hours labor because this shouldn't take very long, and then make a decision on your own. I have no idea where you are because the silly little Kangi on your location might as well be Southern Slobovia, so there is no easy way to calculate the value of parts and labor in your part of the world.

[CamrySExxx]

Originally Posted by gdanaher

I have no idea where you are because the silly little Kangi on your location might as well be Southern Slobovia, so there is no easy way to calculate the value of parts and labor in your part of the world.

that made me go lol

[xpeed]

It's Katakana for "California."

Thanks for the advice though.

[Redline_Me]

Do you need new ones or just need to weld them? Got a pic?

[Dna_splice]

is this one of them?
'03 2AZ Engine Torque Damper

[xpeed]

Yeah DNA! That's what I need to replace and mine looks as bad as yours. Do you have the part number? Also is it hard to install, like do I need a torque wrench to do it at home?

[LE05]

12363-0H050. i don't think you'll need a torque wrench, but if you have one, 47 ft-lbs for the chassis to "dog-bone" mount bolt as well as the dog-bone mount engine bracket bolts. i can't find the torque specs for the dog-bone mount to engine bracket mount bolt.

[Dna_splice]

my local dealer charged me $80-90
supper easy to do.
just follow my DYI

[xpeed]

Thanks everyone! GEN 5 owners are the best people.