09-06-2009, 11:51 PM
|
#1 (permalink)
|
|
'07 XLE
Join Date: Feb 2006
Location: Tacoma, WA
Posts: 6,126
Thanks: 0
Thanked 69 Times in 56 Posts
iTrader Score: 0 reviews
|
T-SB-0190-09 July 1, 2009 Body Floor Pan Noise
2007 – 2009 Camry, Camry HV Plant Code(s): U VDS(s): BB46K, BE46K, BK46K WMI(s): 4T1
Some 2007 – 2009 model year TMMK produced Camry and Camry HV vehicles may exhibit a creaking noise near the front passenger side of the vehicle when the body is flexed while driving on rough roads, over speed bumps, harsh turning, or harsh braking.
This TSB applies to vehicles produced BEFORE the Production Change Effective VINs shown below.
MODEL LINE ENGINE PRODUCTION CHANGE EFFECTIVE VIN
4cyl 4T1BE46K#9U325742 Line 1
V6 4T1BK46K#9U087968 Line 1
4cyl 4T1BE46K#9U849271 Line 2
V6 4T1BK46K#9U590120 Line 2
Hybrid 4T1BB46K#9U081042 Line 2
18 Page Procedure: Pinpoint noise, basically Tear Car interior apart, locate weld, measure for a gap, weld and reassemble.
This repair is covered under the Toyota Comprehensive Warranty. This warranty is in effect for 36 months or 36,000 miles, whichever occurs first, ‘from the vehicle’s in-service date.
|
|
|